Advertisement
FSM
Smart Saniflush
Sensor System
Installation
Guide
MELBOURNE
SYDNEY
Britex Place Mirra Crt
16 Northumberland Drv
Bundoora VIC 3083
Taren Point NSW 2229
t (03) 9466 9000
t (02) 9531 2100
e vic@britex.com.au
e nsw@britex.com.au
PERTH
BRISBANE
Unit 1/8 Principal Link
19 Manilla St
Malaga WA 6090
East Brisbane QLD 4169
t (08) 9249 5464
t (07) 3363 2400
e wa@britex.com.au
e qld@britex.com.au
FSM Installation Guide | QID 3.16 | Rev 2 | 30 Jan 2024
ADELAIDE
The Britex Group
SA State Office
t 1300 764 744
e sa@britex.com.au
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Britex Smart Saniflush FSM
Summary of Contents for Britex Smart Saniflush FSM
- Page 1 Sensor System Installation Guide MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169...
- Page 2 THE PLASTIC BAG PROVIDED WITH THE UNIT FOR FUTURE REFERENCE About The BRITEX Smart Saniflush Sensor System is the ultimate water saving sensor flushing device for urinals. Incorporating a mains-powered micro controller, the Smart Saniflush leads a new generation of automated flushers that provide optimal levels of water conservation without compromising on hygiene.
-
Page 3: Installation Instructions
To prevent this, the Britex In Line Strainer (provided) must be installed. Install the air break device vertically, onto the flush pipe at least 1M above the sparge. Install the solenoid valve directly to the air break or in some convenient position and complete the connections. - Page 4 Date DO NOT SCALE DRAWING SHEET 1 OF TITLE: DINENSIONS ARE IN MILLIMETERS - Smart Sensor System Installation DRAWN Britex Metal Products Co. Pty L CHK'D ACN: 004 309 737 SD-6452.1 DRAWING: 2 Mirra Ct, Bundoora Victoria 30 APPV'D P: 03 9466 9000 F: 03 9466 90...
-
Page 5: Care And Maintenance
Stop turning as soon as the slightest resistance is felt. Only a small amount of turn will be required. Be aware that the adjustment may already be at maximum. Australia’s Finest Stainless | britex.com. FSM Installation Guide | QID 3.16 | Rev 2 | 30 Jan 2024... -
Page 6: Technical Parameters
15 seconds and then reapply. Technical Parameters Inlet Connection 1/2” or 3/4” Inlet. Power 10 amp GPO required Working Pressure 300 kPa - 500 kPa Australia’s Finest Stainless | britex.com. FSM Installation Guide | QID 3.16 | Rev 2 | 30 Jan 2024... -
Page 7: Spare Parts
Users = 3 Users = 3 1 Litre/Stall 1 Litre/Stall these instructions and if the Britex In Line Strainer (provided) has not been installed correctly Full Flush Users = 3 1 Litre/Stall in conjunction with the Smart SaniFlush Sensor System. - Page 8 MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000...
Need help?
Do you have a question about the Smart Saniflush FSM and is the answer not in the manual?
Questions and answers