Table of Contents
Advertisement
Chapter 1: Getting started
Memory card
You will need a microSD memory card to store photos, music, videos and other data.
To install the memory card
1. Insert the memory card with the gold contacts
facing down.
2. Push the memory card until it clicks into place.
To remove the memory card
1. For safe removal, go to Settings > SD card,
USB mass storage & phone storage >
Unmount SD card.
2. Push the memory card down to eject it from the slot.
Note: Please note that the microSD memory card is already inserted in the phone.
1.3 Charging the battery
The battery out of the box is only partially charged. To fully charge the battery, charge
it for 2 hours.
1. Open the Micro USB connector cover.
2. Plug in the battery charger as shown in the diagram.
3. Plug the AC adapter to the wall outlet to start charging.
When the battery is charging, the red LED is activated;
the
icon is also displayed in the status bar. When the
battery is fully charged, the red LED disappears and the
green LED is activated; if the phone is turned on, the
icon is also displayed in the status bar.
Note:
• The battery can also be charged when you connect your phone to the
computer.
• To ensure safety, do not remove the battery from the phone while the
AC adapter is connected or while it is being charged.
1.4 Using a headset
For hands-free conversation or to listen to music, plug a headset into the headset jack.
Note: using a mobile device or accessory while driving may cause distraction and
may be illegal. Always obey the laws and drive safely.
5
Advertisement
Table of Contents
