Download Print this page

Radiodetection DIELECTRIC 200 Quick Start Manual

Download this manual

Model 200 Dehydrator Quick Start Guide

Congratulations on purchasing your new Dielectric dehydrator. This quick start guide will

detail the necessary steps to get your dehydrator quickly setup and working in your

system.

Please refer to the complete user manual for further detail on dehydrator operation and

all safety warning information. Use the included QR code to access online documentation

and instruction booklet, IB-267.

Site Requirements:

 The dehydrator requires a level surface with a minimum of 3 inches clearance on all sides and in an

area with a maximum temperature between 33 and 110 degrees Fahrenheit. Operating the dehydrator

in a temperature range of 60-90 degrees will increase the lifespan of the unit.

 Connect the dehydrator to a properly grounded electrical source with the power cord accessible so

that the power cord may be used as an electrical disconnect.

Need help?

Do you have a question about the DIELECTRIC 200 and is the answer not in the manual?

Page 1 Model 200 Dehydrator Quick Start Guide Congratulations on purchasing your new Dielectric dehydrator. This quick start guide will detail the necessary steps to get your dehydrator quickly setup and working in your system. Please refer to the complete user manual for further detail on dehydrator operation and all safety warning information.
Page 2 1. Install the outlet fitting included with the dehydrator in the accessory bag along with spare fuses. Apply thread sealant compound or Teflon tape to the threads before installing onto the dehydrator. After installing the outlet fitting, attach a 3/8” tube from your system to the fitting. 2.