For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) Nos. indicate the pages and Nos. in the service manual for the base model. 1.1 PACKING SECTION SEP-C1...
RHC1023 Plastic Handle (PE) VEC2292 Spacer (PE) VEC2293 NSP 18 Label VRW1629 1.2 EXTERIOR SECTION MEP-7000/KUCXJ(CONTROL UNIT SECTION) and SEP-C1/UCYSXJ/WL5 are constructed the same except for the following: Part No. MEP-7000 Mark Symbol and Description /KUCXJ SEP-C1 Remarks (CONTROL UNIT...
Dedicated USB driver and utility. The USB driver needs to be software Simplified check of See “5 DIAGNOSIS.” installed for connecting SEP-C1 with a (with utility program USB communication. personal computer. The utility can be for version display) used for checking USB communication.
If there is poor connection on the USB commu- NMAIN ASSY/ communication line. nication line, resolder chips or coils. NJACK ASSY If the problem is not resolved Replace the USB controller (IC706). NMAIN ASSY even after the above-mentioned measures are taken. PRO DJ screen SEP-C1...
Adjust plate (See “JOG Dial” of “7. DISASSEMBLY.”) How to Reset the Measured Value To reset the progressive average value of measured deceleration Location of the adjustor plates Adjust plate time, set the TEMPO adjustment slider to its center position. SEP-C1...
Need help?
Do you have a question about the SEP-C1 and is the answer not in the manual?
Questions and answers