Advertisement

Quick Links

PLANET IPX-2000 Quick Installation Guide
Quick Installation Guide
Overview
PLANET IPX-2000 is the next generation voice communication platform for the
small to medium enterprise. Designed as an open, scalable, and highly reliable
telephony solution, the IPX-2000 is able to accept 200 extension regis-
trations, and effectively scales from under 100 users to as many as 200 in
a standard rack-mountable unit. Designed to run on a variety of VoIP
applications, IPX-2000 provides centralized call control, auto-attendant,
voice conferencing, PSTN access, digital and IP-based communications.
IPX-2000 integrates up to 8 calls via the IPX- FXO (Foreign eXchange Office,
FXO) module to become a feature-rich PBX system that supports seamless
communications between existing PSTN calls, analog, IP phones and SIP-based
endpoints.
IPX-2000 integrates telephony call processing, call control, voice mail,
and a widely PBX application programming interface into a highly scalable
architecture designed to support both traditional circuit-based and the
Internet telephony service within a distributed enterprise communications
network.
With IPX-2000, standard SIP phones can be easily integrated in your office;
plus the auto-config feature, you may integrate our IP phone
VIP-153T/VIP-153PT, and the analog telephone adapter – VIP-156 to build up
the VoIP network deployment in minutes.
Allowing distributed IP technology to meet traditional voice services, with
proactive management interface, the IPX-2000 in the daily business processes,
enterprises can make people more productive, more intelligent tasks, and
more customer satisfaction

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPX-2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Planet IPX-2000

  • Page 1 IPX-2000 provides centralized call control, auto-attendant, voice conferencing, PSTN access, digital and IP-based communications. IPX-2000 integrates up to 8 calls via the IPX- FXO (Foreign eXchange Office, FXO) module to become a feature-rich PBX system that supports seamless communications between existing PSTN calls, analog, IP phones and SIP-based endpoints.
  • Page 2: Table Of Contents

    LAN/WAN Interface quick configurations ................... 6 WAN IP address configuration via web configuration interface............7 IP PBX BASIC OPERATION GUIDELINE ................9 Modifying the IPX-2000 greeting message ..................9 Adding PSTN to IPX-2000 ......................... 10 VOICE COMMUNICATION SAMPLES................. 13 IP PBX –...
  • Page 3 This guide provides physical installation, network configurations, and Internet access establish- ment information for the IP PBX System. Document Organization This guide is organized as follows: • Preparation before beginning administration on IPX-2000 • Administration interface • Network Interface quick configurations •...
  • Page 4: Preparation Before Beginning Administration On Ip Pbx System

    Default LAN IP address of IP PBX is 192.168.1.1. You may now open your web browser, and in- sert http://192.168.1.1 in the address bar of your web browser to logon IP PBX web configuration page. IPX-2000 will prompt for logon username/password, please enter: admin / admin to continue machine administration. - 4 -...
  • Page 5 In order to connect machine for administration, please Note locate your PC in the same network segment (192.168.1.x) of IPX-2000. If you’re not familiar with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations.
  • Page 6: Lan/Wan Interface Quick Configurations

    PLANET IPX-2000 Quick Installation Guide LAN/WAN Interface quick configurations Nature of PLANET IPX-2000 is an IP Sharing (NAT) device, it comes with two default IP addresses, and default LAN side IP address is “192.168.1.1”, default WAN side IP address is “192.168.0.1”.
  • Page 7: Wan Ip Address Configuration Via Web Configuration Interface

    “IP PBX service” page in “Service” menu to click the “Reload” button to make the settings effective. Please contact your Internet service provider to obtain the Hint Internet access type, and select the proper network settings in IPX-2000 to establish the network connections. - 7 -...
  • Page 8 PLANET IPX-2000 Quick Installation Guide Save Change to reload configurations After modifying the IP PBX parameters, the changes are temporary stored in machine memory,. Please be sure to activate the modifications via reloading the machine configurations. Operation path: Service ---> IP PBX service...
  • Page 9: Ip Pbx Basic Operation Guideline

    PLANET IPX-2000 Quick Installation Guide IP PBX Basic operation guideline Modifying the IPX-2000 greeting message To localize the greeting message in the IP PBX system, please record the greeting message in 8000 Hz,16-bit PCM wave file format (*.wav) . After recording the greeting messages, please log in machine via secure web session (HTTPs) (path: Feature -- >...
  • Page 10: Adding Pstn To Ipx-2000

    PLANET IPX-2000 Quick Installation Guide Adding PSTN to IPX-2000 When inserting or removing the IPX-2000 FXO Module (IPX-FXO), please follow these operation procedure to ensure the system operating properly. • Login the GUI as administrator. • Enter FXO Setup page. (Trunk FXO Setup ) •...
  • Page 11 PLANET IPX-2000 Quick Installation Guide Outbound routegroup: select a routegroup to associate routes with this trunk. Outbound calls match included route patterns could employ this trunk to access PSTN. Language: preferred language for system instructions heard from the trunk. Usergroup of privilege: when disabled DID, select a usergroup whose reachability to other usergroups and trunks will be used as the privilege of inbound calls from this trunk.
  • Page 12 PLANET IPX-2000 Quick Installation Guide Please browse to “Usergroup” page in “User” menu, and select outbound “pstn1” trunks accessible by this usergroup. After these configurations, be sure to press to “Save” button to apply settings and browse to “IP PBX service” page in “Service” menu to click the “Reload” button to make the settings effective After any configurations, be sure to press to “Save”...
  • Page 13: Voice Communication Samples

    PLANET IPX-2000 Quick Installation Guide Voice communication samples There are several ways to make calls to desired destination in IPX-2000. In this section, we’ll lead you step by step to establish your first voice communication via keypad and web browsers opera- tions.
  • Page 14 PLANET IPX-2000 Quick Installation Guide STEP 2: Press Show extensions button to create the two extension account/password: 1001/123 (for VIP-153PT), and 2002/123(for VIP-156) for machine registrations. STEP 3: After setting up the parameters, please refer to the path to activate the settings: Ser- vice --->...
  • Page 15 PLANET IPX-2000 Quick Installation Guide Machine configurations on the VIP-153PT STEP 1: After creating accounts on the IP PBX system, please log in VIP-153PT via web browser, browse to the SIP Configuration, and refer to the account settings of the IP Extension to complete the SIP parameters.
  • Page 16: Voice Communication Via Ip Pbx System - Ipx-2000 (Auto-Config)

    Line Number: 2002 Machine configurations on the IPX-2000 STEP 1: Log in IPX-2000 and browse to the DHCP menu and create new options list for the auto configuration. Code: please insert 151 as the DHCP server option. - 16 -...
  • Page 17 PLANET IPX-2000 Quick Installation Guide Value: http://LAN IP for IPX-2000/tftpboot If you’d like to enable auto-config for IP extension features in IPX-2000, please be sure to setup the DHCP option code and the value information. In most case, insert the optional code 151 and the value=http://192.168.0.50/tftpboot/ •...
  • Page 18 After enabling the Auto-config feature, the VIP-153PT shall be able to obtain IP address and SIP extension information from IP PBX system IPX-2000 information. The VIP-153PT will perform registration to IPX-2000 after obtaining the extension config file. - 18 -...
  • Page 19: Quick Reference In Cd-Rom Guide

    SIP extension information from IP PBX system. To verify the auto-config results, you may connect telephone set to VIP-156, press #120# to check if the IP address is obtained from IPX-2000. And #122# can be used to verify the extension number as- signed by IPX-2000.

Table of Contents