Aiwa XD-DW5U Operating Instructions Manual page 38

Ratings
Caution
In some discs, the rating level mentioned on
the disc label is not registered inside the
disc. To check whether the lock setting is
functional in this unit, carry out the lock
setting procedures.
1 At the initial setting screen, select
"Ratings" by using i or k. Then press
ENTER.
2 Use i or k to move the cursor (the
yellow area) to the level you would like
to set.
The smaller the number, the higher the level
of restriction. For instance, setting the rating
level to 1 will make it impossible to play any
disc with a rating level from 2 to 8.
The rating scheme may vary from disc to
disc. Check the actual disc.
Rating
Choose the item ik
Level 8 No Limit (for Adult)
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Max Limit (for Family)
ENTER : Choose item
SETUP : Complete
3 Press ENTER.
A password entry screen is displayed.
PASSWORD
Enter the Password
PASSWORD
ik Number UP/DOWN
jl Move The digit cursor
0 ~ 9 Code input
ENTER : Choose item
SETUP : Complete
4 Use the number buttons, i or k to
enter a four-digit password.
To correct the input number, press j or l to
move the cursor to the number to be
corrected, and then input new number .
RETURN : Previous menu
– – – –
RETURN : Previous menu
5 Press ENTER.
Confirm your password.
Confirmation the Password
The Player is locked
Remember the Password
PASSWORD
Press ENTER Button
Do not forget the password you set!
If you forget the password
Reset the unit to default condition and set all
the settings again including the "Ratings"
setting (see page 43).
6 After confirming the password, press
ENTER again.
Your entry is saved.
7 Press SET UP to exit the setup menu.
To change the settings
1 At the initial setting screen, select
"Ratings" by using i or k. Then press
ENTER.
2 Input four-digit password and press
ENTER.
3 Select an item: "Unlock Player" (lift the
limitation.), "Change Password", or
"Change Level".
Ratings
Choose the item ik
1 Unlock Player
2 Change Password
3 Change Level
ENTER : Choose item
SETUP : Complete
4 Carry out the procedure according to
the instruction on the liquid crystal
display.
5 Press SET UP to exit the setup menu.
2 5 8 7
RETURN : Previous menu
CONTINUE
ENGLISH
36