Motorola MOTOSLVR - RED Manual page 14

Gsm wireless phone
Table of Contents

Advertisement

connect the memory card to a computer
You can access your phone's memory card with a PC.
When your phone is connected to a computer, you can
Note:
only access the memory card through the computer.
On your phone:
Press - > Settings > Connectivity > USB Settings
> Memory Card.
This directs the USB connection to your memory
card. Attach the Motorola Original USB cable to the
accessory port on your phone and to an available
USB port on your computer. Then follow these
steps:
On your computer:
Open your "My Computer" window, where your phone's
1
memory card shows as a "Removable Disk" icon.
Click on the "Removable Disk" icon to access the files on
2
your phone's memory card.
To store the desired files onto the memory card, drag and
3
drop them as follows:
MP3 files: > mobile > audio
screen savers: > mobile > picture
wallpapers: > mobile > picture
video clips: > mobile > video
32
main attractions
turn Bluetooth power on or off
Press - > Bluetooth Link > Setup > Power > On
Find it:
If Bluetooth Power is On, your phone can automatically pair
with the handsfree device you have used before. Just turn
on the device or move it near the phone.
To extend battery life, use the above procedure and set
Note:
Bluetooth Power to Off when not in use. Your phone will not
pair with devices until you set Bluetooth Power back to On
and pair your phone with the devices again.
pair with a headset or handsfree device
Before you try to pair your phone with a device, make
sure your phone's Bluetooth power is on and the device is
on and ready in pairing or bonding mode (see the user's
guide for the device). You can pair your phone with only one
device at a time.
Press - > Bluetooth Link > Handsfree > [Look For
Find it:
Devices]
Your phone lists the devices it finds within range.
Highlight a device in the list and press the Select key.
1
If necessary, enter the device passkey (such as 0000) and
2
press the Ok key.
When your phone is paired, the Bluetooth indicator à shows
in the home screen.
For information about your headset or handsfree device,
Tip:
refer to the instructions that came with it.
34
main attractions
When you finish, remove the device by selecting the
4
"Safely Remove Hardware" icon in the system tray at the
bottom of your computer screen. Then select "USB
Mass Storage Devices" and "Stop".
Select "USB Mass Storage Device" then "OK".
5
On your phone:
To return to Data Fax as your USB default connection, press
- > Settings > Connectivity > USB Settings > Default
Connection > Change > Data/Fax Connection.
Bluetooth® wireless
Your phone supports Bluetooth wireless pairing (also called
linking or bonding). You can pair your phone with a Bluetooth
headset or car kit or pair your phone with a computer to
exchange and synchronize files.
The use of wireless devices and their accessories may
Note:
be prohibited or restricted in certain areas. Always obey the
laws and regulations on the use of these products.
copy objects to another device
You can use Bluetooth pairing to copy a media object,
phonebook entry, datebook event or bookmark from
your phone to a computer or other device.
Highlight the object on your phone that you want to copy
1
to the other device.
Press - > Mark (or press 0 to mark objects) and then
2
press - > Copy Marked Files (for media objects), Send (for
datebook events) or Share Phonebook Entry (for phonebook
entries).
Select a recognized device name or [Look For Devices] to
3
search for the device where you want to copy the object.
advanced Bluetooth features
features
make phone
Allow a Bluetooth device to
visible to other
discover your phone:
device
- > Bluetooth Link > Setup > Find Me
pair with
Pair your phone with a recognized
recognized
handsfree device:
device
- > Bluetooth Link > Handsfree > [Look
For Devices]
drop pairing
Highlight the device name and
with device
press the Drop key.
main attractions
33
main attractions
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motoslvr

Table of Contents