EchoLife EG8010H Quick Start Manual

Gpon terminal

Advertisement

EchoLife EG8010H GPON Terminal
Safety Precautions
T o use the device properly and safely, read the safety precautions carefully
before using the device and strictly observe these precautions when using
the device.
Safety precautions:
 Store devices and accessories in temperature –10°C to +35°C and relative
humidity 30%–85% RH for at most 9 months. If the ambient temperature or
relative humidity is overhigh or overlow, the device may be faulty.
 Used only indoors. Do not lead metallic cables, such as network cables and
telephone lines outdoors.
 Do not look directly into the optical port without eye protection.
 Keep the device out of the reach of children as the components or
accessories may be swallowed.
 Install the device in strict compliance with the requirements of the supplier.
Reserve a space of at least 10 cm above and around the device for heat
dissipation. During the installation, keep the device away from electric
appliances that generate strong magnetic or electric fields, such as
microwave ovens, refrigerators, and mobile phones.
 The described input voltage range should comply with the local power grid.
For example, the input voltage of the adapter is 200–240 V AC for
European Union; the input voltage of the adapter is 100–140 V AC for
America.
 If the power adapter is damaged and its internal circuit is exposed due to
manmade factors, do not touch the exposed circuit, which may bring safety
risks.
 Only power adapters delivered with the device can be used. Otherwise, the
device may be abnormal or unsecure.
 Dry your hands before connecting or disconnecting cables. Stop the device
and switch off the power before connecting or disconnecting cables.
Quick Start
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EG8010H and is the answer not in the manual?

Questions and answers

Summary of Contents for EchoLife EG8010H

  • Page 1 EchoLife EG8010H GPON Terminal Quick Start Safety Precautions T o use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device. Safety precautions:  Store devices and accessories in temperature –10°C to +35°C and relative humidity 30%–85% RH for at most 9 months.
  • Page 2  Do not place any object on the device, so that the device will not be damaged due to overheating or deformation.  Prevent objects, such as metal, from entering the device through the heat dissipation hole.  Switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable, during periods of lightning activities.
  • Page 3: Product Overview

    Product Overview Product Function EG8010H 1 Ethernet port Technical Specifications Power adapter input: 100–240 V AC, 50–60 Hz  System power supply: See the nameplate on the device.  Ambient temperature: 0ºC to +40ºC  Ambient humidity: 5%–95% (non-condensing) ...
  • Page 4 2. PON terminals can be mounted onto a wall or be placed on a workbench. Do not install PON terminals in other modes, such as the ceiling. 3. The terminal cannot be connected to other devices such as GPON terminals, switch and router. 4.
  • Page 5: Connecting Cables

    Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads of the screws 3 mm over the wall. Then install the GPON terminal to the screws. 2.Drill two holes and install 3.Install screws and the GPON terminal. 1.Mark the installation positions.
  • Page 6 Do not use any power adapters that are not in the standard configuration. Otherwise, the device may be abnormal or unsafe. Step 4 Press the ON/OFF power switch. The connections between the EG8010H and other devices are shown as follows: Power switch Power port...
  • Page 7 Logging in to the Web Configuration Window Step 1 Set the IP address of the PC in the same subnet as the management IP address of the PON terminal. NOTE You can find the default management IP address on the nameplate of the device.
  • Page 8: Indicator Descriptions

    Indicator Descriptions Indicator status description 1 Table 1-1 Indicator Status Description Steady The Ethernet connection is in the normal state. Data is being transmitted on the Blinking Ethernet port. The Ethernet connection is not set up. LOS/PON See Table 2. Steady The terminal is powered on.
  • Page 9 Indicator status description 2 Table 1-2 Status Status Description The GPON terminal is prohibited by the upper-layer device, contact the service provider for help. The GPON terminal attempts to Blinks set up a connection with its twice a upper-layer device. second A connection is set up between Steady...
  • Page 10: Disposal And Recycling Information

    Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage.
  • Page 11 (EU) 617/2013, (EU) 801/2013, and its implementation regulation (EC) NO 278/2009. If all wired network ports are connected and all wireless network ports are activated, the power consumption of the product in networked standby is less than 20 W. For the product information displayed on the manufacturers' freely accessible websites required by (EU) No 801/2013, please visit www.huawei.com/en/product-certification.
  • Page 12: Warranty Card

    Warranty Card Thank you for choosing Huawei T echnologies Co., Ltd. T o get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition. User Information Personal or company's full name: Address/Postal Code: Telephone: Email:...
  • Page 13: Limited Warranty

    Limited Warranty Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (Huawei for short) warrants its access terminals ("Products") to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product ("Warranty period"). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge.
  • Page 14 Qualification Card PASS Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

Table of Contents