Get Started; Charge The Battery; Install The Battery - Motorola MOTORAZR VE20 Getting Started Manual

Hide thumbs Also See for MOTORAZR VE20:
Table of Contents

Advertisement

get started

battery
get started

install the battery

1
Press the battery cover release
button. While still pressing the
button, slide the cover down
slightly until it pops up, then lift
it off the phone.
2
With the gold contacts facing
down and toward the lower end
of the battery, insert the battery,
lower end first.
3
Fit the battery cover back onto
the phone and slide it forward
into place.
get started
Charging from your computer:
Note:
Optional accessories required.
You can charge the battery by connecting a cable from
your phone's micro USB port to a high-power USB
connector on a computer (not a low-power one, such as
the USB connector on your keyboard or bus-powered
USB hub). Typically, USB high-power connectors are
located directly on your computer.
Both your phone and your computer must be turned on,
and you must have correct software drivers installed on
your computer. Cables and software drivers are available
in Motorola Original
TM
data kits, sold separately.
Note:
For battery use and battery safety information, see
your User's Guide.

charge the battery

New batteries are not fully charged. Before you can use
your phone, install and charge the battery. Some
batteries perform best after several full charge/discharge
cycles.
Using the charger:
1
Insert the charger into your
phone's micro USB
connector. Plug the other
end of the charger into an
electrical outlet.
2
During charging, the battery level indicator at the
upper right of the screen flashes on and off. When
charging is complete, the battery level indicator
remains on. Unplug the charger.
Note:
indicator shows charging progress. At least one
segment of the indicator must be visible to ensure
full phone functionality while charging.
7
8
Notes for charging your phone's battery:
• When charging your battery, keep it near room
temperature. Never expose batteries to
temperatures below 0°C (32°F) or above 45°C
(113°F) when charging.
• New batteries are not fully charged.
• New batteries or batteries stored for a long time
may take more time to charge.
• Motorola batteries and charging systems have
circuitry that protects the battery from damage
from overcharging.
9
10
get started
When you charge the battery, the battery level
get started

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motorazr ve20 - ve20 - alltel

Table of Contents