Network - Modecom FreeTAB 1014 IPS X4+ User Manual

MODECOM FREETAB
Note: After pairing, it shows under the Bluetooth device "Paired but
not connected", but file transmission is still possible.
You can see the received files by touch the top right corner icon.
At present, the Bluetooth function only supports files transmission.
To extend battery life, turn Bluetooth power off when not in use.
3.2.4 Pairing Tablet with the Bluetooth Keyboard
To pair your tablet with a Bluetooth Keyboard, turn on Bluetooth
module in your tablet, then turn on the keyboard by holding "OFF/
ON" button for two seconds (LED status indicates by flash that the
tablet is on)
The next step is to press "Connect" button on the keyboard (LED
status indicates communication mode activation flashing constantly)
In the tablet click "Search for devices" (button is located in Blue-
tooth bookmark which is in the upper right corner), the keyboard is
going to be found automatically. Please click found device, one-time
access code will appear (4 digits), the code must be entered, confirm
by pressing "Enter", the device will be connected.
3.3 3G Network
A 3G network is a mobile network that allows high-speed data ac-
cess and advanced network capacity. It features a wider range of ser-
vices and advanced network capacity over the previous 2G network.
Your tablet supports external 3G network by a 3G dongle. 3G don-
gles are connected via the USB HOST port. There require a convert
cable, you can find in the accessories.
Note: some models support 3G network optional. If you purchase
this tablet with a SIM card slot, you can access to the Internet via your
3G SIM card while Wi-Fi network is not available. Please insert your
3G card into the SIM card slot of the tablet, and the tablet will obtain
3G signal automatically. If you purchase this tablet without a SIM