Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TASMAN DTM-TAS-6V and is the answer not in the manual?

Questions and answers

Summary of Contents for OZtrail TASMAN DTM-TAS-6V

  • Page 2: Table Of Contents

    Large windows include a protective awning with integrated Climate Control ventilation HELPFUL HINT system OZtrail advises to read your owner’s manual • Puncture resistant heavy duty PE floor fully and assemble your tent before going camping to ensure all parts are present and •...
  • Page 3: Products And Parts

    If you have any questions, your OZtrail dealer will be happy to help you. The following parts are included for Product Code: DTM-TAS-6V Part Description ...
  • Page 4: Assembly Instructions

    Assembly Instructions Step 1 Choose the site Step 4 Assemble the poles Select a sheltered camp site protected from the Assemble all poles making sure each pole wind that will not allow water to pond under junction is securely connected. Place the the tent floor.
  • Page 5 Assembly Instructions cont. Step 6 Install the rain fly Unfold the fly, slip the remaining pole through the sleeve along the front edge of the fly. HELPFUL HINT Do not force pole through the sleeves as this may damage the sleeve and could break the pole.
  • Page 6 Assembly Instructions cont. Figure 10 Step 7 Guy rope and peg out Peg out the guy ropes attached to the fly, make a loop (about 30 to 50 cm long) with the slider on the end of the rope and peg out as far as possible from tent.
  • Page 7: Disassembly Instructions

    Disassembly Instructions of tent poles as a rolling pin ensuring the tent Step 1 edges are kept straight as you roll. Release guy ropes and Posibrace™ Velcro™ tab points that attach the fly to the poles. Remove Step 8 the vestibule pole from the fly sheet. Once the tent bundle is rolled up, tie the straps around it and place into the tent carry bag Step 2...
  • Page 8: Warranty

    Warranty OZtrail products are warranted for one HELPFUL HINT: year from date of purchase. OZtrail agrees AVOIDINg MOULD AND MILDEW during the warranty period to repair any manufacturing defects in the product or, at You should always pack your products both its option, replace the product with another clean and completely dry.
  • Page 9: Prolonging The Life Of Your Tent/Shelter

    Fading of colour is an early • When removing pegs, do not use the warning sign. OZtrail products are not webbing or corner of the tent as your designed as permanent dwellings or handle.
  • Page 10: Important Safety And Care Information

    Please read before setting up your tent/shelter CAMP SAFE - SAFETY HABITS TO PREVENT INJURY CAUSED BY FIRE Fabrics used in the construction of OZtrail tents/ • Do not pitch the tent/shelter near a camp shelter are treated for fire retardant properties.
  • Page 11 Important Safety and Care Information cont. To prevent injury caused by your camping environment • Do not pitch your tent/shelter on an area that could get flooded • Do not pitch your tent/shelter near cliffs in case of collapse or rock fall •...
  • Page 12: Replacing The Shock-Cord

    Poles and Shock Cord you will be ensuring that you get the best performance and life out of Step Two: Threading the Pole Sections your OZtrail Tent. Tie a large knot in the end of the Shock Cord length. This knot needs to be large enough...
  • Page 13 Tent Pole and Shock Cord Replacement cont. Once your new pole is cut to length you can HELPFUL HINT follow the ‘Replacing Shock-Cord’ directions to Towards the end of the Pole Length it may get your Pole Length complete. get quite hard to thread the Pole Sections as the Shock Cord is stretching.
  • Page 14: Understanding Waterproofness

    To prevent this, do not pitch the Know your tent tent over hollows and make sure water drains away from the tent. OZtrail tents are manufactured from waterproof and water repellent fabrics. However, with the STRUCTURAL INTEgRITY addition of seams, zips and other desirable...
  • Page 15: Zips

    Zips REDUCINg THE RISk OF JAMMINg CRIMPINg A ZIP-SLIDER FABRIC IN THE ZIP The most common reason why zips burst open is that the zip slider does not close the coil • When using the zip, hold the pull-tab tightly enough. Wear and tear may cause the between your thumb and forefinger with gap marked A to open up.
  • Page 16 Check out www.oztrail.com.au for other great products from OZtrail Leisure Products Designed & Imported by: OZtrail Leisure Products • 45 Limestone Street Darra QLD 4076 • Made in China...

Table of Contents