AMPD MC900B Quick Start Manual

Quick Start Guide
•
Place a charged battery into battery terminal on the side of cooler. It should click into place like
it would on a tool.
•
If the touch pad on front of cooler does not light up, press and hold SRC button until cooler
makes audible noise or touch pad lights up.
•
If touch pad is RED, press SRC button once to change it to BLUE.
•
If the touch pad is BLUE, begin searching for Boss Audio MC900B with your Bluetooth device to
connect to your cooler.
•
Once paired, cooler will make an audible tone to let you know it's connected.
•
Begin playing audio to your cooler. Once you have started playing audio, you can use the touch
pad on the cooler to control the device paired with the cooler.
Bluetooth Operation
Reconnection
1) Power on the MC900B on your last paired device Bluetooth
2) The unit will now automatically reconnect, and a confirmation tone will be heard from the
speakers
3) If your device was previously paired with the Boss Audio MC900B, but it wasn't the last paired
device:
a. Ensure no other devices are currently paired
b. Enter the Bluetooth Menu on your device being paired
c. "Boss Audio Mc900B" will be displayed under Available Devices
d. Choose the "Boss Audio Mc900B" to reconnect
4) If the device is out of range from the MC900B, it will disconnect automatically:
a. To reconnect once device is back in range, press the Power
b. The MC900B will now reconnect to the device, a confirmation tone will be heard
from the speakers
Clearing Previously Paired Devices Memory
AMPD Coolers
button once