Download Print this page

Icare TONOVET Pro Quick Manual

Hide thumbs Also See for TONOVET Pro:

Download this manual

ENGLISH

Need help?

Do you have a question about the TONOVET Pro and is the answer not in the manual?

Page 1 ENGLISH...
Page 2 TURNING THE TONOMETER ON AND LOADING THE PROBE Press the Select or Measure button to turn the tonometer on. Illustrations of these alternative ways of starting. Remember to use the wrist strap. MEASURE LOAD LOAD Pressing the Select button Pressing the Measure button Open the probe tube by removing the cap and insert the probe into the probe base as shown in the image.
Page 3 Icare TONOVET Pro tonometer Quick Guide ENGLISH To perform a successful measurement, the distance from the tip of the probe to the patient’s cornea (see pictures) should be about 4-8 mm (about 5/32 - 5/16 in.). Bring the tonometer in front of the patient’s eye with the probe pointing to the center of the cornea.
Page 4 ONE SHORT BEEP Indicates a correct single measurement. DOUBLE BEEP Indicates an incorrect single measurement. (See error messages from instruction manual). LONG BEEP Indicates that six succesful measurements are done and IOP result is available on the display. PARTS OF THE TONOMETER Measuring support Probe base Probe base collar...