Butts of Bawtry LASER 6901 Quick Start Manual

Incorrect or out of phase engine timing can result in damage to the valves. The
Tool Connection cannot be held responsible for any damage caused by using
these tools in anyway.
Safety Precautions – Please read
• Disconnect the battery earth
leads (check radio code is
available)
• Remove spark or glow plugs to
make the engine turn easier
• Do not use cleaning fluids on
belts, sprockets or rollers
• Always make a note of the route
of the auxiliary drive belt before
removal
• Turn the engine in the normal
direction (clockwise unless
stated otherwise)
• Do not turn the camshaft,
crankshaft or diesel injection
pump once the timing chain has
been removed (unless
specifically stated)
• Do not use the timing chain to
lock the engine when slackening
or tightening crankshaft pulley
bolts
• Do not turn the crankshaft or
camshaft when the timing belt/
chain has been removed
• Mark the direction of the chain
before removing
• It is always recommended to
turn the engine slowly, by hand
and to re-check the camshaft
and crankshaft timing positions.
• Crankshafts and Camshafts may
only be turned with the chain
drive mechanism fully installed.
• Do not turn crankshaft via
camshaft or other gears
• Check the diesel injection pump
timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle
manufacturer's service manual or
a suitable proprietary instruction
book
• Incorrect or out of phase engine
timing can result in damage to
the valves
Lower Arm Rear Bush Removal Tool
Ford Transit
To fit OEM bushes 4540787, 4042024, 4372132
Part No. 6901