Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HDWR HD19
Summary of Contents for HDWR HD19
- Page 1 User Manual Wireless barcode reader HD19...
-
Page 2: Table Of Contents
Table of contents Specifications: ................................3 Features: .................................... 4 Set contents: ................................... 4 Control codes - data transmission channel settings: ..............4 Control codes – settings of the reader's switch-off time: ............. 5 Control codes – settings of the reader's operating modes: ............7 Control Codes –... -
Page 3: Specifications
Specifications: • Warranty: 2 years • Material: ABS + PC • Light Source: CCD LED • Scanning method: manual (push-button) • Scan confirmation: LED (red, blue), two types of sound • Scanning Speed: 200 times/second • Reading width: 100 mm •... -
Page 4: Features
Features: • Scan speed: 200 scans per second • Wireless range: up to 200 meters • Wireless frequency: 433 MHz • Battery Capacity: 1200mAh Set contents: • Wireless barcode reader • USB Receiver • USB charging cable Manual • Control codes - data transmission channel settings: By default, the reader is paired with the receiver on channel 01. -
Page 5: Control Codes - Settings Of The Reader's Switch-Off Time
Control codes – settings of the reader's switch-off time: The reader automatically turns off after 20 seconds. This time can be changed by scanning the code "Change the reader's off time" and then the code with the selected time you want to set. Change the reader's turn-off time... - Page 6 20 seconds 30 seconds 60 seconds 5 minutes 10 minutes 20 minutes...
-
Page 7: Control Codes - Settings Of The Reader's Operating Modes
Control codes – settings of the reader's operating modes: The reader can operate in two modes of operation: real mode - the scanned codes are immediately sent to the device with which the reader is connected, or in the storage mode - the scanned codes are saved in the reader's memory and then, after scanning the appropriate code, they are sent once to the device connected to the reader. -
Page 8: Control Codes - Factory Reset
Deleting data from the reader's memory Control Codes – Factory Reset: To perform a factory reset, you need to scan the two codes below. Control codes – programming prefix and suffix In the reader you can program many different characters both before the code (prefix) and after the code (suffix). - Page 9 Set prefix Set suffix...
Need help?
Do you have a question about the HD19 and is the answer not in the manual?
Questions and answers