Sealey LED1000SB Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or
9
damaged DO NOT use.
Ensure the light is fully charged before initial use.
9
DO NOT charge in damp conditions.
8
DO NOT turn the light on when it is being charged.
8
DO NOT shine directly into you're, another person's or an animal's eyes.
8
DO NOT allow children to use the light.
8
DO NOT handle or move the light whilst it is being charged.
8
DO NOT use the light if you suspect that the battery or the light casing is damaged.
8
DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
8
recharge the battery at least once every six months of non-use.
DO NOT attempt to open, disassemble, modify or service the battery pack.
8
DO NOT crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT expose to temperatures above 60°C (140°).
8
Replace only with the battery pack designated for this product.
9
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool
9
water and seek immediate medical attention.
WARNING! DO NOT place the lampface down while in use.
‰
2. INTRODUCTION
Powerful 10W SMD LED torch with 1000lm output on super boost mode for 30 seconds. 73mm Long conveniently sized yet powerful torch
is easy to transport and store. 1m Height impact resistance and water resistance rating of IPX4. Features a belt clip and magnetic base
for hands-free operation. Easy to read charge indicator displays the current battery level while charging. Charges via a USB Type-C cable
(Supplied).
3. SPECIFICATION
Model No
Battery:
Charging Time:
LED Type:
Lumen Output:
Nett Weight:
Operating Time:
The battery fitted to this light is considered to be a consumable item and its ability to accept a charge will reduce over time. We will
provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear. If the battery
is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not
replace the battery regardless of whether it is less than one year old.
Note: The lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without
another charge.
© Jack Sealey Limited
SUPER BEAM RECHARGEABLE POCKET LIGHT,
10W SMD LED, 1000LM, 3 LIGHT MODES
MODEL NO:
LED1000SB
3.7V 0.6Ah Lithium-ion
2.5hr
SMD LED
1000lm
0.063kg
High/Med/Low: 2/4/15hr
Original Language Version
LED1000SB
LED1000SB Issue 1 13/06/24