Table of Contents
Advertisement
D Connecting to an AV receiver equipped with a Dolby Digital (AC-3) decoder
Use either a commercially available optical cord or a 75 ohm coaxial cord when connecting this unit to an AV receiver with
a Digital In jack. The supplied video cord is also available instead of a coaxial cord.
Rear of the unit
Front
speaker (L)
Surround speaker (L)
When your TV is equipped with an S-video input terminal, see page 16.
Set the setup menu correctly after connecting!
Set the "TV Aspect" and "Digital Audio Output" of the setup
menu according to the audio equipment and TV connected
to the unit as follows:
(See "CHANGING SETUP VALUE" on page 38 for details.)
Digital Audio Output
DOLBY DIGITAL/PCM
TV Aspect
When your TV is a conventional-screen size TV:
4:3 Letter box
When your TV is a wide-screen size TV:
16:9 Wide
TV
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
S-VIDEO
COMPONENT
VIDEO
S-VIDEO
OPTICAL
OUT
OUT
to DIGITAL OUT
OPTICAL jack
Optical cord (not supplied)
to the digital input jack
Center speaker
Subwoofer
NOTE
If picture noise appears while playing copy-protected DVDs,
connect the unit directly to a TV. Do not connect through a
VCR, TV/VCR, or AV selector.
CAUTION
When connecting an AV receiver not equipped with a Dolby
Digital decoder using an optical or coaxial connecting cord,
do not select "DOLBY DIGITAL/PCM" in the "Digital Audio
Output" of the setup menu.
Merely attempting to play a DVD may cause a screeching
noise which could be harmful to your ears and damage the
speakers. In such a case, be sure to select "PCM" in the
"Digital Audio Output."
yellow
to the video input jack (yellow)
Video cord (supplied)
to VIDEO OUT jack (yellow)
yellow
AUDIO
COMPONENT
AUDIO
OUT 2
VIDEO OUT
OUT 1
L
Pb
L
R
Pr
R
R
Y
VIDEO
OUT
to DIGITAL OUT
COAXIAL jack
or Coaxial cord
to an AC outlet
(not supplied)
Receiver equipped with a Dolby
Digital decoder
Surround speaker (R)
CONTINUE
AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)
Front
speaker (R)
En
13
ENGLISH
Advertisement
Table of Contents
