Advertisement
Quick Links
Mini ToolBar
position options
Alignment Top side
Alignment Left side
Alignment Right side
Alignment Lower side
Components
Mini ToolBar
Holder
Magnetic
Eraser
2 x Microfiber
Cloth
2 x Writing Tools
Install your new Mini ToolBar
1. Prior to setting up your accessory Mini
ToolBar, we recommend you perform
an initial cleaning on your writing board
following manufacturer recommendations.
2. Next, remove the Mini ToolBar from the
package and place it on your magnetic
writing board. You can place the Mini
ToolBar four different ways. The open side
should always face the board. Choose the
one that fits you best!
3. Remove the round, magnetic eraser from
the package, place in the docking system of
the Mini ToolBar, then remove your writing
tools and place them in the grips of the Mini
ToolBar.
Copyright © 2024 Polyvision Corp.
polyvision.com
Advertisement
Related Manuals for PolyVision Mini ToolBar
Summary of Contents for PolyVision Mini ToolBar
- Page 1 ToolBar, we recommend you perform an initial cleaning on your writing board following manufacturer recommendations. Alignment Top side 2. Next, remove the Mini ToolBar from the package and place it on your magnetic Mini ToolBar Holder writing board. You can place the Mini ToolBar four different ways.
- Page 2 Turn the eraser upside Remove the Replace the cloth down and rotate the ring ring 15° counter clockwise to unlock Eraser Base Microfiber Cloth Closure Ring Center the cloth Push the ring back Rotate the ring 15°clockwise to lock polyvision.com...
Need help?
Do you have a question about the Mini ToolBar and is the answer not in the manual?
Questions and answers