America Acer encourages information technology (IT) equipment owners to responsibly recycle their equipment when it is no longer needed. Acer offers programs and services to assist equipment owners with this process. For more information on recycling IT equipment, please go to: https://www.acer.com/ac/en/US/content/recycling...
Page 10
DISPLAY DATA CHANNEL(DDC) STANDARD TIMING TABLE...
Page 11
LCD Monitor KG1 Series USER GUIDE USB Cable (Optional) USB Type C Cable (Optional)
Page 19
15-pin color display signal cable Threading Explanations Threading Explanations +5 V Green Logic ground Blue Monitor ground Monitor ground DDC-continuous data DDC return Line sync signal Red-ground Field sync signal Green-ground DDC-continuous clock Blue-ground 24-pin USB Type C cable PIN No. Signal Assignment PIN No.
Page 21
1. Turn off your computer and unplug the power cord. 2. 2-1 C onnect Video Cable a. Make s ure both the monitor and computer are powered-OF F . b. Connect the VGA cable to the computer. (Optional) 2-2 Connect HDMI Cable (Only HDMI-input model) (Optional) a.
Page 22
Note:The location and names of the function buttons and power button on the monitor may vary according to monitor model,and some button may not available for some models. Type1 HotKey 1,2 buttons. Press to activate user defined hotkey function. Type2 Power Type3-1 Type3-2...
Page 23
Using the Shortcut Menu The button and the actual functions depend on detail model.Some functions might be grayed if the model can not support . Note:Please select the button function operation according to the actual button type. The button of Type 1 The button of Type 2...
Page 24
The button of Type 3-1 The button of Type 1 The button of Type 2 The button of Type 3-1 The button of Type 3-2 Open the Function page to select the menu function,and then use the Button Menu/Navi/Ok to adjust the settings you need.When finished, Pull left the Button Menu/Navi/Ok to return to the previous level or exit the menu.
Page 25
Adjusting the Setings Use buttons to open the OSD and navigate to the Settings you need. The button of Type 1 Use Buttons 1/2 to select the Settings you need from the OSD. The button of Type 2 Use Buttons 1/2 to select the Settings you need from the OSD. The button of Type 3-1 Using the Navi/Ok button, to select the Settings you need from the OSD.
Page 26
Adjusting the Picture Standard Low Blue Light 1. Brightness: Adjust the brightness from 0 to 100. Note: Adjusts the balance between light and dark shades. 2. Contrast: adjust the contrast from 0 to 100. Note: Sets the degree of difference between light and dark areas. 3.
Page 27
7. H. Position: Adjust the horizontal position from 0 to 100. 8. V. Position: Adjust the vertical position from 0 to 100. 9. Focus: Adjust the focus from 0 to 100. 10. Clock: Adjust the clock from 0 to 100.
Page 28
2. Color temperature: Default is warm. You can choose Cool, Warm, Normal, Low Blue Light or User. 3. Modes: Select your preferred mode. 4. sRGB mode is for getting better color matching representation with the peripheral device, such as DSCs or printers. 5.
Page 30
/Freesync Premium/Freesync Premium Pro/Adaptive-Sync If FreeSync /Freesync Premium//Freesync Premium Pro/Adaptive-Sync is ”OFF”, then the user can set Over Drive to...
Page 31
cards only. Freesync Premium: Select On or Off.Freesync Premium is available for AMD supported graphic cards only. Freesync Premium Pro: Select On or Off.Freesync Premium pro is available for AMD supported graphic cards only. Adaptive-Sync: Select On or Off. Adaptive-Sync is available for AMD supported graphic cards only.
Page 32
Note: 1. For Side 9 key,Must press Navi Key in the middle to unlock OSD. 2. For side/Bottom 1/5 key,except power key can be unlocked.
Adjusting the System 1. Input: Select the source from an available input source. 2. Auto Source: Automatically searches for available input sources. 3. Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2. 4. Wide Mode: You can select which screen aspect you are using. 5.
EU Declaration of Conformity KG241Y KG241Y EN55032:2015+A1: 2020 Class B EN 55035:2017+A11: 2020 EN IEC 61000-3-2:2019+A1:2021 Class D EN 61000-3-3:2013+A2:2021 EN IEC 63000: 2018 May. 10,2023 Acer Incorporated (New Taipei City)
Page 38
KG241Y xxxxxx KG241Y (“x” = 0~9, a ~ z, A ~ Z, or blank)
Need help?
Do you have a question about the KG241Y and is the answer not in the manual?
Questions and answers