Please read this document and all safety warnings before attempting installation. WARNINGS/CAUTIONS: All Bose Professional products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building codes and regulations.
Installation Assembling the Tile Bridge Align the rails and insert the tabs into the slots. Pull the rails outward to secure them together. Note: If you are installing in a hard ceiling, assemble the tile bridge after inserting the rails and ring through the hole cutout.
ADVERTENCIAS/PRECAUCIONES: Todos los productos Bose Professional deben instalarse conforme a las leyes locales, estatales, federales y del sector. Es responsabilidad del instalador garantizar que la instalación del sistema de soporte y los altavoces se realice conforme a los códigos aplicables, incluidos los códigos y las reglamentaciones...
Instalación Montaje del puente de mosaico Alinee los rieles e inserte las lengüetas en las ranuras. Tire los rieles hacia afuera para asegurarlos. Nota: Si está realizando la instalación en un techo duro, monte el puente de mosaico después de insertar los rieles y el anillo a través de la perforación.
Need help?
Do you have a question about the FreeSpace FS2C and is the answer not in the manual?
Questions and answers