Furuno HUB-102 Installation Manual

WARNING
Do not open the shield
cover unless totally familiar
with electrical circuits.
Only qualified personnel
should work inside the
equipment.
Do not install the unit where it may be
submerged in water.
Water in the unit can result in fire, electrical
shock, or damage to the equipment.
Use only the supplied power cable.
Fire or damage to the equipment can result
if a different power cable is used.
Do not disassemble or modify the
equipment.
Fire, electrical shock, or serious injury
can result.
INSTALLATION GUIDE
HUB-102 Network Hub
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
HUB-102
https://www.furuno.com/
CAUTION
standard steering
compass compass
0.05 m 0.05 m