Loading The Dishwasher - Blomberg DWT37200 Use And Care Manual

4. LOADING THE
DISHWASHER
1. Pull the handle to open the door. If
the door is opened during operation, the
dishwasher will stop running. Once the
door is closed the program will continue.
Upper rack
DEPENDING ON MODEL
Top rack load pattern for 12 place
settings according to the AHAM DW-
1 Standards
CAUTION
Hot steam can escape! Danger of
serious burns or other injury.
2. Remove coarse food leftovers from
tableware.
3. Now you can load the dishwasher.
Lower rack
Bottom rack load pattern for 12
place settings according to the
AHAM DW-1 Standards
CAUTION
• Large knives and other utensils with
sharp tips and edges must be placed
horizontally into the upper rack due to
risk of injury. Other smaller knives and
sharp utensils should be placed with
sharp side down in the cutlery basket.
• Use extreme caution when removing
knives and other sharp utensils from
the dishwasher. These items may
have shifted position during the wash
program, and may be wet or slippery.
• The cup racks are designed to
support cups, glasses and kitchen
utensils. When the cup racks are in
the dishwasher do not lean on or use
the cup racks to support your body
weight.
Notice :
• Your dishwasher holds a maximum of 12
place settings.
• Place all containers such as cups,
glasses and pots into the dishwasher
with the opening facing downwards (so
that no water can collect).
• Small and light items can go into the
upper rack.
• Long and narrow items are placed in the
middle of the racks.
• Place all large and very dirty items in the
lower rack.
• Dishes and cutlery should not be placed
above each other.
• Glasses should not touch.
• The movement of the spray arms must
not be hindered.
• Do not overload your dishwasher and
pay attention to manufacturer instructions
regarding dishes which are appropriate
for use in for a dishwasher. Only with
suitable dishes (mentioned in section 5)
will you obtain optimal washing results
with a sensible use of energy.
5
USA