Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fairland X30
Summary of Contents for Fairland X30
- Page 1 AI-WIRELESS ROBOTIC POOL CLEANER USER MANUAL X30/45/60/80 THANK YOU FOR PURCHASING X30/45/60/80 AI-WIRELESS ROBOTIC POOL CLEANER Please read the manual carefully before using or operating the robot cleaner Keep for reference and subsequent use.
- Page 2 TIPS How to achieve the most efficient cleaning It is recommended to place the robot at the pool corner, which will facilitate quick coverage of the entire pool floor area. How to let the water drain out while removing robot from the pool Place the robot on the edge of the pool for a while and let the water drain out.
- Page 3 WARNINGS Information contained in this warnings page will help you operate the robot safely, protect yourself and others from hazards, and prevent damage to the robot and other property. GENERAL WARNINGS • The robot is designed for pool cleaning; do not use it for other purposes. •...
-
Page 4: Table Of Contents
Table of Contents SECTION 1. PRODUCT OVERVIEWS ....................... 5 1.1 Packaging content ............................... 5 1.2 Technical specification ............................6 1.3 Preparation ................................7 SECTION 2. OPERATION ........................... 8 2.1 Button and display introduction ......................... 9 2.2 Operating robot and robot functions ....................... 10 2.3 Emptying the filter basket .......................... -
Page 5: Section 1. Product Overviews
SECTION 1. PRODUCT OVERVIEWS 1.1 Packaging content The following items are included in the packaging of robot. Please contact your dealer if any damage or loss. ① The robot ② Charger ③ Hook ④ Magnetic cap*2 ⑤ User manual Note: 1. -
Page 6: Technical Specification
1.2 Technical specification Model 30~70 ㎡ 20~50 ㎡ 15~40 ㎡ 15~30 ㎡ Suggested pool size Performance condition reference*: Floor mode Endurance time 4.5h Performance condition reference*: Floor/wall/waterline mode Endurance time 4.5h 3.5h 2.5h Charging time Battery 14Ah (352wh) 10.4Ah (262wh) 7.8Ah (196wh) 5.2Ah (131wh) Optimum pool temperature... -
Page 7: Preparation
1.3 Preparation ① Remove the Magnetic cap from the bottom of the ② Remove the plug cover. Fully charge the unit, the plug robot and store in a safe place (required for winterization must be replaced after charging. and unit reset). ③... -
Page 8: Section 2. Operation
SECTION 2. OPERATION CAUTION To prevent possible damage to the robot or people, be sure to follow these guidelines: • After cleaning is completed, store the robot in the a cool dry place away from direct sunlight. • The robot becomes heavier when filled with water. Pay special attention when lifting it out of the water, lift slowly allowing all water and residue to drain before lifting clear of the pool. -
Page 9: Button And Display Introduction
2.1 Introduction of button Cleaning Error Battery Wifi Cleaning On/Off mode Mode code indicator signal time Type of button Icon Display Status Description Green light flashes Setup status Power switch Running status/Inspection Green light on status under water 1 green light on Cleaning time: 0.5H 2 green lights on Cleaning time: 1.0H... -
Page 10: Operating Robot And Robot Functions
Infrared sensor fault Abnormal water sensor 1 green light on Battery level: 20-50% Battery light (charge 2 green lights on Battery level: 50-75% disconnected） 3 green lights on Battery level: 75-100% Low battery 1 red light flashing Battery level: 15-20% 1 green light flashing Battery level: 0-50% 1 green light on, 1 green light flashing... -
Page 11: Emptying The Filter Basket
2.3 Cleaning filter basket When cleaning is done, the robot will stop by the wall of pool. Please use the hook to catch the handle and lift the robot out of the water, then clean the filter basket as below operation: Note: There is a risk of being scratched by surface debris when cleaning the filter basket with your hands, it is recommended to wear rubber gloves for protection. -
Page 12: Wifi Matching For The Robot
green and the indicator light of the adapter will be red. If the battery bar indicator is full when 3 green lights are on, and the indicator light of the power adapter will also turn green, then the robot is fully charged. Disconnect the charger after charging is completed to protect the battery life. -
Page 13: Section 3. Maintenance
SECTION 3. MAINTENANCE WARNING 1. To avoid electric shock and other hazards which could result in major injuries, disconnect the adapter from the power source before performing any cleaning and maintenance. 2. Before any maintenance operation, be sure to insert back the magnetic cap at the bottom of the robot to avoid injuries caused by impeller rotation! 3.1 Filter maintenance Clean the filter thoroughly and regularly for a better cleaning and climbing performance. -
Page 14: Replacing The Worn Brushes
The steps are as follows: ① Take out the filter box, remove the fixing screws of the inflow ring cover, and take out the inflow ring cover. ② Remove the deflector fixing screws and take out the deflector. ③ Remove the impeller screw, then take out the impeller. (PS: impeller edge is sharp, please wear gloves while operating. -
Page 15: Replacing The Worn Tracks
② Fit the side without tabs under the brush holder. ③ Roll the brush around its support, slide the tabs into the attachment holes and pull on the end of each tab until its edge passes through the slit. 3.4 Replace the worn tracks Remove the worn tracks: Position the new tracks:... -
Page 16: Section 4. Trouble Shooting
SECTION 4. TROUBLE SHOOTING Failure Possible reason Solution Debris on the electrode of charging Clean debris head (Non-failure) The bottom Magnetic cap isn’t Charging failure Remove the Magnetic cap removed (Non-failure) Charger is damaged Replace charger The Magnetic cap isn’t removed Remove the Magnetic cap (Non-failure) Water spots on the robot display or... - Page 17 Full load of filter basket Clean filter basket (Non-failure) Under floor cleaning mode Turn to overall cleaning mode (Non-failure) Check whether there are too many debris in the guide ring, affecting the rotation of the impeller. (Please insert The impeller is stuck back the magnetic cap before operation, to avoid injuries Not climbing caused by the impeller rotation).
- Page 18 Indoor indoor power supply use only. Recycling When disposing of the product, please hand it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of waste equipment at the time of disposal will help ensure that it is recycled in a manner that protects human health and the environment.
Need help?
Do you have a question about the X30 and is the answer not in the manual?
Questions and answers