Advertisement
Quick Links
ROUTER LIFT
O W N E R ' S M A N U A L
Patent No. US 8,485,766 B2
1
8
9
10
DIAGRAM
QuickLift
NUMBER
(QTY)
1
(1)
2
(1)
3
(1)
--
4
(5)
5
(1)
6
(1)
7
(10)
8
(1)
9
(1)
(1)
10
(2)
11
If you think you're missing anything, email us at mailroom@woodpeck.com.
You can also call us at 800-752-0725 from 9:00 a.m. to 4:00 p.m. EST Monday - Friday.
2
5
6
7
11
QuickLift HDS
PART NAME
(QTY)
(1)
Crank Handle
(1)
QuickLift Wrench (Handle, Shaft, Hex Screw, #8-32 x 5/8")
--
QuickLift Aluminum Plate
(1)
QuickLift HDS Steel Plate
(5)
INCRA MagnaLock Rings 3/8", 1", 1-5/8", 2-5/8", 3-5/8"
(1)
Steel Starting Pin
(1)
Cam Screw
(10)
Set Screws, 1/4-28 x 3/8"
(1)
Hex Key, 3/32"
(1)
Hex Key, 1/8"
(1)
Hex Key, 5/32"
(2)
Thumbwheel Nut
SAFETY
FIRST
3
Always unplug your router
motor before making
any adjustments to the
Router Lift. Refer to your
routers' owners manual
for specific safe operating
instructions.
4
Advertisement
Related Manuals for Incra Woodpeckers QuickLift HDS Series
Summary of Contents for Incra Woodpeckers QuickLift HDS Series
- Page 1 (QTY) (QTY) Crank Handle QuickLift Wrench (Handle, Shaft, Hex Screw, #8-32 x 5/8”) QuickLift Aluminum Plate QuickLift HDS Steel Plate INCRA MagnaLock Rings 3/8”, 1”, 1-5/8”, 2-5/8”, 3-5/8” Steel Starting Pin Cam Screw (10) (10) Set Screws, 1/4-28 x 3/8”...
- Page 2 1. Place the QuickLift in the opening on your router table. 5/32” Hex key 2. If you have an INCRA router table, Use the (10) threaded holes around the perimeter of the plate for access to the leveling screws that are already in- stalled in the table.
- Page 3 QUICKLIFT WRENCH FIG.6 1. Attach the Handle to the end of the QuickLift Wrench and lock in place with the included Button Head Socket screw and Hex Key, Fig 6. 2. To change the router motor height, orient the QuickLift Wrench with the handle end pointing towards the router motor and lower into the QuickLift Wrench Access, Fig 7.
- Page 4 STEEL STARTING PIN FIG.10 Starting Pin When not using the router table fence, the Steel Starting Pin Alternate starting pin may be inserted into one of the three threaded holes as an aid threaded holes in guiding your workpiece into the cut, Fig 10. Starting pin MAGNA-LOCK RING INSERT SYSTEM 1.
Need help?
Do you have a question about the Woodpeckers QuickLift HDS Series and is the answer not in the manual?
Questions and answers