Qazqa 107655 Instruction Manual

INSTRUCTION MANUAL
(NL) Gebruikte symbolen
(GB) Safety Precautions / (FR) Symboles utilisés / (DE) Verwendete Symbole / (PL) Stosowane symbole / (NO) Brukte symboler /
(DK) Brugte symboler / (SE) Använda symboler / (FI) Käytetyt symbolit / (IT) Simboli usati / (ES) Símbolos empleados /
(CZ) Použité symboly / (PT) Símbolos utilizados / (GR) χρησι οποιού ενα σύ βολα
IP44
220-240V
~50Hz
Max.Φ45mm
E27 Max.1W
Chill Light String 10 Clear
107655
Warranty
• This luminaire is covered by a 1-year warranty valid for in-store replacement or refund only.
• This luminaire is not suitable for use with dimmer switches. The warranty will be void if the luminaire is used on the
same circuit, which has a dimmer switch.
• Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty
Installation Requirements
• This luminaire is designed to be used with a mains power socket outlet (not included).
The installation location must have an existing mains power socket outlet (not included) pre-installed.
If you don't have an existing mains power socket outlet (not included), please contact your licensed electrician.
• Select a suitable location for installation:
-The mounting point must support 2 times the weight of the luminaire.
This luminaire is protected against water penetration to IP44 standards, which is against low-pressure jets of
water from all practicable directions.
• Only use the supplied plug-in power supply with this luminaire.
• The luminaire must not be used if the protective shield has cracked. Replace any cracked protective shield before
using the luminaire.
• Take care not to pull any electrical wires during unpacking as this may damage the connection.
• Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
• Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
• Do not plug into the mains power socket outlet before or during assembly. Only do so after the luminaire is fully
assembled and is ready to use for the first time.
Installation Directions
1. Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
2. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material.
3. Using the loops on the luminaire, hang the luminaire up onto hooks.
4. Connect the luminaire to the plug-in power supply and tighten the bi-pin plugs.
NOTE: Only use the supplied plug-in power supply with this luminaire.
5. Insert the plug-in power supply (A) into mains power socket outlet (not included) and ensure it is fully plugged in.
6. Switch on the luminaire to test all the lighting functions and enjoy your new luminaire
FittinQ B.V.
ittinQ L T D
F
Smaragdweg 52,5527LB Hopert,
55Baker Street,
The Netherlands
London,W1U 7EU
www.qazqa.nl
United Kingdom
INSTRUCTION MANUAL
Chill Light String 10 Clear
107655
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
FittinQ B.V.
ittinQ L T D
F
Smaragdweg 52,5527LB Hopert,
55Baker Street,
The Netherlands
London,W1U 7EU
www.qazqa.nl
United Kingdom
Srting bulb light
incl.LED QL7001295
250lm Lamp
3.8W Lamp
220-240V~50Hz
2200K
CRI＞80
20000 h
15000 ON/OFF
8718881160592