Summary of Contents for Delta Children babyGap 25508C
Page 1
WHISPER BEDSIDE BASSINET INSTRUCTION MANUAL 25508C Styles and colors may vary ASSEMBLY INSTRUCTIONS WARNING: CHOKING HAZARD Adult assembly required because of small parts. Keep assembly parts out of reach of children under 3 years. IMPORTANT: Read all instructions before assembly and use of the product. Keep the instructions for future reference.
• If a sheet is used with the pad use only the one provided by Delta Children or one specifically the dimension of the bassinet mattress. •...
Page 4
Before returning this product to the store! Let’s see if we can assist you! • Not sure how to assemble our product? Visit our site for easy to follow instructions along with some Tricks and Tips assembly videos https://www.deltachildren.com/pages/instructions • If you are missing a piece or have a damaged part Please contact our Consumer Experience Center for assistance, email gcs@DeltaChildren.
LIMITED MANUFACTURER WARRANTY This Delta product is warranted to be free from defects for a period of 90 days from the date of purchase under normal use. If a product is defective during this period, we will at our option repair or replace the defective part or product.
Page 6
Parts Bassinet Body Left Side Frame Right Side Frame with Mattress Stand Stand (with wheel) (with wheel) Bottom Cross Support Bar Securing Strap x2 Mattress Support Bar Hardware *Screws are actual size to scale M6 Hex Screw (X4) Hex Wrench Nut &...
Page 7
Assembly Bassinet Frame Assembly Assembly Overview • Identify the Mattress Support Bar, the Left and Right Frame Stands and Mattress the Bottom Support Bar. (Fig. 1) Support Bar • Line up Mattress Support Bar with the opening in the Right Side Frame Stand.
Page 8
Assembly Fig. 2 Leg Extension • Fully extend both sides of the bassinet legs by pressing the button located on top of the bassinet legs and pull outward to fully extended position (Fig. 2) Support Tube Side Buttons Bolt Fig. 3A Insert both sides of the top support tube into the bassinet frame Fig.
Height Adjustment STEP 1 WARNING: NEVER adjust height with baby inside. NOTE: To adjust up or down you must unlock EACH SIDE separately. STEP 2 & 3 Locking Housing Lever Support Bar STEP 4 6 POSITIONS STEP 1: Locate left side locking housing (A), push and hold up from underneath locking housing (B).
Page 10
Customer Service www.DeltaChildren.com gcs@deltachildren.com...
Page 11
Mattress Push Buttons on both sides Box Spring • Move the crib close to the adult bed and check the height of the crib compared with the mattress of the bed. WARNING! The height of the adult mattress should always be more than •...
Page 12
Mattress Customer Service www.DeltaChildren.com gcs@deltachildren.com...
Page 13
Disassembly Fig. 1B Bolt Fig. 1A Undo nut and bolt and lift upward to remove. Repeat on opposite side. Fig. 1D Fig. 1C Unscrew bolt from Mattress Support Bar and pull out of Leg Frame. Repeat on other side Loosen screws with wrench counter-clockwise •...
Care and Maintenance • Check bassinet for worn parts, torn material • Before each usage or assembly, inspect unit or stitching periodically. for damaged hardware, loose joints, missing parts or sharp edges. NEVER use this product • Replace or repair the parts as needed. if there are any loose or missing fasteners, Use Delta replacement parts.
Need help?
Do you have a question about the babyGap 25508C and is the answer not in the manual?
Questions and answers