25942 – K-N1MILE-6 Operating Instructions and Precautions 04122302
Charging: This product is rechargeable. Please charge fully before first use to ensure optimal
performance. Pull back the rubber port cover. Connect the full sized USB plug of the included
charging cable to a USB power source such as a power cube, computer or car adapter and the
Micro USB plug into the charging port of the flashlight. A red flashing light indicates charging is
in progress. Charging is complete when the charging light turns solid green. Replace the port
cover. Note: DO NOT USE THE FLASHLIGHT WHILE IT IS CHARGING!
LOCK OUT PROTECTION: This flashlight automatically locks after 2 minutes of non-use!
Double click the power button to unlock the flashlight. The light blinks twice to confirm it is
unlocked. Click again to select your desired brightness mode. Double clicking the power
button also manually locks the flashlight, preventing accidental activation. The light blinks
twice to confirm it is locked. For safety reasons, store the flashlight in locked mode & remove
batteries.
Flashlight Operation: Repeatedly pressing the power button cycles between high and low
brightness modes plus off.
To adjust the beam size, hold the body of the flashlight stationary while pushing or pulling the
head in or out to the desired amount of focus.
The base of the flashlight is magnetic and adheres to most smooth, rust-free metal surfaces
except aluminum.
Charging a Smartphone: Pull back the rubber port cover. Using your own phone charging
cable, connect the full sized USB plug into the flashlight's USB port. Connect the other end to
your device. Replace the port cover when finished. Note: Charging a smartphone reduces the
runtime of the flashlight.
Battery Replacement: Unscrew the battery compartment cap at the base of the flashlight and
remove the battery. Insert a new 26650 3.7v 4000mAh rechargeable lithium ion battery with
the raised end first. Screw the battery cap back on. Caution: Do not overtighten.
Caution: Lithium batteries can explode or cause burns if shorted, overheated, disassembled,
recharged or exposed to fire or high temperature (above 212°). If the flashlight is turned on
while in a container or in clothing, the flashlight can overheat, damage the flashlight and/or
cause surrounding material to ignite.
Warning! To prevent serious injury, including temporary or permanent loss of sight do not stare
into the light, shine light into eyes or focus the beam using an additional lens. Keep away from
infants and toddlers as this product contains small parts.
This product is not a toy! Use this light only as it is intended. Inspect before every use. Do not
use if parts are damaged, loose or missing.
Need help?
Do you have a question about the K-N1MILE-6 and is the answer not in the manual?
Questions and answers