Advertisement
Quick Links
SYNERGY TV MOUNT
SL/PM2 FOR 3-BAY CABINETS
Before You Begin
•
This TV mount is intended for use with TV's 70" and smaller
with a maximum weight of 165lbs. (75KG)
•
Use with products heavier than the maximum weight or larger than the size
indicated may result in instability causing possible injury.
303-366
•
Mounts must be attached as specified in assembly instructions. Improper
installation can result in serious personal injury.
Parts
303-366 Wall Bracket
Hardware Bag - PHK-516
F
(8x) 300-485
Button Head Screw
K
(2x) 300-540 Bolt
Salamander Designs, Synergy TV Mount SL/PM2 for 3-Bay Cabinets
2 Extruded Posts
2 Extruded Posts
G
(16x) 300-560
Joint Connector Bolt
Flat Nut
J
(1x) 400-060 3/16" Hex Key
L
(1x) 400-080 5/32" Hex Key
R
(2x) 301-422 Base Plate
M
(4x) P-303-817
1/4-20 x 3/8"
S
(5x) 301-600 Wire Manager
Q
(8x) 301-575
Plastic Fasteners
P
(2x) 301-425
Post Cover
500-888 [12.22]
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Salamander Designs SYNERGY SL/PM2
Summary of Contents for Salamander Designs SYNERGY SL/PM2
- Page 1 1/4-20 x 3/8” (16x) 300-560 Plastic Fasteners Joint Connector Bolt Flat Nut (1x) 400-060 3/16” Hex Key (2x) 300-540 Bolt (2x) 301-425 (1x) 400-080 5/32” Hex Key Post Cover Salamander Designs, Synergy TV Mount SL/PM2 for 3-Bay Cabinets 500-888 [12.22]...
- Page 2 Guide the flat nuts (G) through the front of the posts. If necessary, use rubber mallet or other device to ensure the posts fits snugly against the top surface. Tighten the screws (F) with hex key. Salamander Designs, Synergy TV Mount SL/PM2 for 3-Bay Cabinets 500-888 [12.22]...
- Page 3 Salamander product, let us know. We are here to make it right. 1.800.535.5659 Full warranty including limitations and warranty claim information may be found at www.salamanderdesigns.com/customer-service/warranty/ Salamander Designs, Synergy TV Mount SL/PM2 for 3-Bay Cabinets 500-888 [12.22]...
- Page 4 Plastic Fasteners (2x) 300-460 (2x) 301-425 Post Cover (1x) 400-080 5/32” Hex Key 400-035 Wrench Salamander Designs, Synergy TV Mount SW/PM2 for 4-Bay Cabinets 500-889 [12.22] FOLD AND ALIGN THIS BEND WITH THE REAR OF THE CABINET. POKE THROUGH POKE THROUGH USING A PENCIL 1.25”...
- Page 5 Salamander product, let us know. We are here to make it right. 1.800.535.5659 Full warranty including limitations and warranty claim information may be found at www.salamanderdesigns.com/customer-service/warranty/ Salamander Designs, Synergy TV Mount SW/PM2 for 4-Bay Cabinets 500-889 [12.22]...
-
Page 6: Before You Begin
• Carefully inspect the mount for shipping damage or missing parts. If any damage is apparent or you are missing parts contact Salamander Designs at 800-535-5659. • Read ALL instructions before assembly. If you have any questions, please contact your installation contractor or Salamander Designs. - Page 7 For five full years Salamander Designs Ltd. will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be returned to the factory prepaid, Salamander Designs Ltd.
Need help?
Do you have a question about the SYNERGY SL/PM2 and is the answer not in the manual?
Questions and answers