Summary of Contents for Salamander Designs Synchro FurnitureMate SYFM1
Page 1
To help protect the environment, use the appropriate recycling and discarding methods for the packaging items. Read ALL assembly instructions before assembly. If you have any questions, please contact your installator or Salamander Designs at 800-535-5659. IMPORTANT SAFETY INSTRUCTIONS Tools Required Adjustable Wrench Phillips Screwdriver...
Page 2
Parts M4x10 M8x16 M6x25 M6x12 M10 Washer M8 Nut M6 Allen 4 M8 Allen 5 SYFM1 - 501-620 10/08 page 2 of 12...
Assemble Frame Attach Back Panel Note Reversible Back Panel SYFM1 - 501-620 10/08 page 3 of 12...
Page 4
Assemble Rotary Mechanism - Manual Option Only For Motorized Assembly, See Step 4 SYFM1 - 501-620 10/08 page 4 of 12...
Page 5
Assemble Rotary Mechanism - Motorized Option Only Remove Plastic Caps from the top and bottom SYFM1 - 501-620 10/08 page 5 of 12...
Page 6
DANGER: ELECTRIC SHOCK HAZARD! Do not provide power to mount when front covers are removed. Always use caution when working in or around mount when front covers are removed. Connect IR Cable Connect Power Cable SYFM1 - 501-620 10/08 page 6 of 12...
Page 7
Install TV Mount Align rotary mechanism holes to preferred adjustable hole pattern on mounting plate. Optional XL Bracket With height adjustable mounting hole patterns. TV Leveling Supports Adjust after installing TV SYFM1 - 501-620 10/08 page 7 of 12...
Page 8
Screen Fixing Fasteners Attaching TV Bracket Screw 5x30mm 6x Screw 5x12mm 6x Screw 4x16mm 6x Screw 8x40mm Screw 8x16mm Screw 6x12mm Height Screw 6x30mm 6x Washer 4mm Spacer 8mm Washer 6mm 6x Washer 8mm 6x Washer 5 mm 6x Allen 4 Allen 5 Allen 3 Mounting Hole Width:...
Page 9
If Mounting Hole Height Exceeds : 15.75” (40 cm) Use Extensions Set TV On Stand SYFM1 - 501-620 10/08 page 9 of 12...
Page 10
Safety Fasteners, Cable Management & Cap Installation SYFM1 - 501-620 10/08 page 10 of 12...
Attach IR Sensor - Motorized Option Only Note: IR Sensor must be placed where signal can be reached at all angles. Programming Remote A. Pull the tab at the bottom of the remote control to enable the battery. B. Plug in the PILOTMOTION power supply cable. C.
Page 12
Always remove TV from mount before moving stand. SALAMANDER DESIGNS LIMITED WARRANTY Salamander Designs Ltd. (Salamander) provides the following Limited Warranty. The Limited Warranties herein described for the specific products listed below shall be in lieu of any other warranty, expressed or implied, including but not limited to any implied warranty of merchantability or fitness for a particular use.
Need help?
Do you have a question about the Synchro FurnitureMate SYFM1 and is the answer not in the manual?
Questions and answers