Do you have a question about the FURREAL FRIENDS ZAMBI THE BABY ELEPHANT and is the answer not in the manual?
Questions and answers
Tammy A Wittig
May 6, 2025
Won't turn on
1 comments:
Mr. Anderson
May 18, 2025
The Hasbro ZAMBI THE BABY ELEPHANT may not turn on because the switch is in the "OFF" position or the battery power is low. Try petting its back. If it still doesn't respond or makes erratic movements or sounds, replace the batteries.
This answer is automatically generated
Tammy
May 6, 2025
New batteries don't work
1 comments:
Mr. Anderson
May 18, 2025
New batteries may not work in Hasbro ZAMBI THE BABY ELEPHANT if:
1. Batteries are inserted incorrectly (wrong polarity). 2. Battery types are mixed (e.g., old with new, or different types like alkaline with carbon-zinc). 3. The terminals are short-circuited. 4. The toy needs to be reset by switching it off and on or by removing and reinserting the batteries. 5. Rechargeable batteries are used improperly or mixed with other types. 6. There is local electrical interference affecting the toy.
Ensure correct battery installation and reset the toy if needed.
This answer is automatically generated
Related Manuals for Hasbro FURREAL FRIENDS ZAMBI THE BABY ELEPHANT
Page 2
Thank you for adopting ZAMBI THE BABY ELEPHANT, a Special Edition pet from FURREAL FRIENDS®. Your purchase supports PROJECT ZAMBI, a fund established to benefit children orphaned by AIDS in Africa. Be sure to wear the included bracelet to show your support for these children! ZAMBI THE BABY ELEPHANT moves and makes sounds just like a real elephant! Be sure to take good care of your pet by following the instructions in this booklet.
Page 3
GETTING TO KNOW ZAMBI Poseable legs Trunk sensor Chest sensor TRY ME/OFF/ON switch and battery door Back sensor A sensor is a part of the toy that responds to your touch!
HOW TO PLAY To turn ZAMBI THE BABY ELEPHANT ON, open the plush flap over the battery door and TRY ME OFF ON switch the TRY ME/OFF/ON switch to ON. Then close the plush flap. Pet ZAMBI on his back to activate his sensors. ZAMBI responds to your touch and moves his trunk, ears, head and mouth just like a real elephant! He also trumpets, makes kissing and...
Page 5
Pet ZAMBI on his back and he’ll respond to your touch by wiggling his ears, moving his trunk or making trumpeting, sighing or eating sounds. If you press his back for several seconds, he’ll raise his trunk and make “kissing” sounds! Tickle ZAMBI on his chest to make him giggle.
CLEANING INSTRUCTIONS To clean your pet, gently brush his fur with a cloth or soft brush to loosen any dirt. Then use a slightly damp cloth to remove stains. • Do not put in the washing machine. • Do not submerge in water. •...
IMPORTANT: BATTERY INFORMATION CAUTION: 1. Always follow the instructions carefully. Use only batteries specified and be sure to insert them correctly by matching the + and – polarity markings. 2. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
Need help?
Do you have a question about the FURREAL FRIENDS ZAMBI THE BABY ELEPHANT and is the answer not in the manual?
Questions and answers
Won't turn on
The Hasbro ZAMBI THE BABY ELEPHANT may not turn on because the switch is in the "OFF" position or the battery power is low. Try petting its back. If it still doesn't respond or makes erratic movements or sounds, replace the batteries.
This answer is automatically generated
New batteries don't work
New batteries may not work in Hasbro ZAMBI THE BABY ELEPHANT if:
1. Batteries are inserted incorrectly (wrong polarity).
2. Battery types are mixed (e.g., old with new, or different types like alkaline with carbon-zinc).
3. The terminals are short-circuited.
4. The toy needs to be reset by switching it off and on or by removing and reinserting the batteries.
5. Rechargeable batteries are used improperly or mixed with other types.
6. There is local electrical interference affecting the toy.
Ensure correct battery installation and reset the toy if needed.
This answer is automatically generated