Troubleshooting - Argus DC3810 User Manual

TROUBLESHOOTING

If you experience difficulties, check the following items. Should the difficulty persist, contact Argus at
1-888-552-7487 or e-mail us at customerservice@arguscamera.com
Problem
The camera will not
focus in the autofocus
mode.
The shutter-release
button won't release.
Cause
Lighting's too dark, foreground in-
vades the subject, low contrast, or
aiming at bright, reflective surface.
The subject is under the minimum
or over the maximum focusing
distance.
No power to camera.
The function dial is not set at
The previous image is loading
onto the CF card. (this function
takes less than five seconds--the
green focus lamp will blink)
Solution
Switch to focus lock or manual
focus mode. Make sure light source
is behind you.
Check the distance to subject and move
forward or backward accordingly,
or simply change the focus setting.
Rotate the function dial to
and slide the power switch to turn
.
on the camera.
Simply wait for the image to load
onto the CF card. The green focus
lamp will stop blinking and "Record-
ing" will stop flashing on the LCD.
Page
39
40
37-43
33
35
151