Subscribe to Our Youtube Channel
Related Manuals for Robam JJZY-7MG10
Summary of Contents for Robam JJZY-7MG10
- Page 1 技术要求： 1.材质：铜版纸，材质符合ROHS标准，每平米105g； 2.尺寸：A5大小； 3.彩色封面。印刷字迹清晰明了. 4.颜色以电子档为准，图为说明书封面。 Revision 22-10-13 美国Robam 商标Robam KSMS-Robam-03-004 7MG10 安装指导 40400400309 铜版纸...
- Page 2 Installation Instructions Instructions d’Installation Before operating this unit, please read the user manual completely and keep it. If the manual is lost, you can send e-mail to overseas@robam.com, request for an electronic manual. JJZ(Y/T)-7MG10 Dual Fuel Range...
-
Page 4: Table Of Contents
TABLE OF CONTENTS RANGE SAFETY ....................2 INSTALLATION REQUIREMENTS ................. 5 Tools and Parts ....................... 5 Location Requirements ....................6 Electrical Requirements ....................9 Gas Supply Requirements ...................11 INSTALLATION INSTRUCTIONS ................ 14 Step 1 - Unpack Range ....................14 Step 2 - Install Anti-Tip Bracket ..................15 Step 3 - Make Electrical Connection ................16 Step 4 - Make Gas Connection ..................20 Step 5 - Install Range ....................21... -
Page 5: Range Safety
Dual Fuel Range RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. - Page 6 Dual Fuel Range WARNING Fire Hazard If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. - Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- Page 7 Dual Fuel Range In the State of Massachusetts, the following installation instructions apply: • State of Massachusetts. • If using a ball valve, it shall be a T-handle type. • State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
-
Page 8: Installation Requirements
Dual Fuel Range INSTALLATION REQUIREMENTS TOOLS AND PARTS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. TOOLS NEEDED Tape measure Flat-blade screwdriver ¼" nut driver Phillips screwdriver Level Marker or pencil Cordless electric drill Masking tape... -
Page 9: Location Requirements
Dual Fuel Range PARTS NEEDED supply. See “Electrical Requirements” and “Gas Supply Requirements” sections. • Gas Supply Line Kit (Supply line and 2 adapters) LOCATION REQUIREMENTS VENTILATION IMPORTANT: combustion and ventilation air. • It is the installer’s responsibility to comply with installation clearances if located on the left-hand side of the oven frame. - Page 10 Dual Fuel Range GENERAL • The range should be located for convenient use in the kitchen. • Recessed installations must provide complete enclosure of the sides and rear of the range. • cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood or microwave hood combination that projects horizontally a minimum of 5"...
- Page 11 Dual Fuel Range Back of Range Access Panel to Electrical Supply Connection Power Cord Opening Recessed area Power Supply IMPORTANT: mounted, but an electrical outlet in the wall must be recessed to make the connection. For Direct Wiring, the electrical box should be mounted to the wall. "...
-
Page 12: Electrical Requirements
Dual Fuel Range NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is covered by 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. 30" (76.2 cm) minimum clearance between the cooking and the bottom of an uncovered wood or metal cabinet. - Page 13 Dual Fuel Range WARNING Electrical Shock Hazard The electrical power to the oven branch circuit must be shut off while line connections are being made. Do not use an extension cord with this appliance. Electrical ground is required on this appliance. The free end of the green wire (the ground wire) must be connected to a suitable ground.
-
Page 14: Gas Supply Requirements
Dual Fuel Range A copy of the above code standards can be obtained from: Canadian Standards Association Toronto, ON M9W 1R3 CANADA. • grounded. • to be plugged into a standard 14-30R wall receptacle. Be sure the wall receptacle • GAS SUPPLY REQUIREMENTS WARNING Explosion Hazard... - Page 15 Dual Fuel Range IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149 – latest edition.
- Page 16 Dual Fuel Range Flexible metal appliance connector: • for connecting range to the gas supply line. • A ½" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the appliance pressure regulator. •...
-
Page 17: Installation Instructions
Dual Fuel Range GAS SUPPLY PRESSURE TESTING Line pressure testing above 0.5 psi gauge (14" WCP) of 0.5 psi (3.5 kPa). Line pressure testing at 0.5 psi gauge (14" WCP) or lower The range must be isolated from the gas supply piping system by closing its system at test pressures equal to or less than 0.5 psi (3.5 kPa). -
Page 18: Step 2 - Install Anti-Tip Bracket
Dual Fuel Range STEP 2 - INSTALL ANTI-TIP BRACKET WARNING Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. -
Page 19: Step 3 - Make Electrical Connection
Dual Fuel Range STEP 3 - MAKE ELECTRICAL CONNECTION After reading the requirements for each connection method, follow the electrical POWER SUPPLY CORD - CANADA ONLY WARNING Electrical Shock Hazard Plug into a grounded outlet. Do not use an extension cord. Failure to do so can result in death, fire, or electrical shock. - Page 20 Dual Fuel Range DIRECT WIRE - U.S.A ONLY WARNING Electrical Shock Hazard Disconnect power before servicing. Improper connection of aluminum house wiring and copper appliance wiring, only use connectors designed and UL listed for joining copper to aluminum and precisely follow the manufacturer's recommended procedure.
- Page 21 Dual Fuel Range 3-WIRE CONNECTION (GROUNDED NEUTRAL) - U.S.A. ONLY. WARNING Electrical Shock Hazard Grounding through the neutral conductor is prohibited for new branch-circuit installations (1996 NEC); mobile homes; and recreational vehicles, or in an area where local codes prohibit grounding through the neutral conductor.
- Page 22 Dual Fuel Range 2. Connect the 2 black wires together using a UL listed wire connector. 3. Connect the 2 neutral (white) wires and the ground (green or bare) wire (of the range cable) using a UL listed wire connector. 4.
-
Page 23: Step 4 - Make Gas Connection
Dual Fuel Range STEP 4 - MAKE GAS CONNECTION WARNING Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. If connected to LP, have a qualified person make sure gas pressure does not exceed 14"... -
Page 24: Step 5 - Install Range
Dual Fuel Range CONNECT GAS LINE FROM GAS PRESSURE REGULATOR TO GAS SUPPLY: 1. Apply pipe-joint compound made for use with LP gas to the tapered (NPT) threads of both adapters supplied with gas line kit. 2. Attach one adapter to the gas pressure regulator and the other to the gas NOTE: Do Not rotate the gas pressure regulator. - Page 25 Dual Fuel Range 3. Slowly attempt to tilt the range forward. If you encounter immediate resistance, the range foot is engaged in the anti-tip bracket. Go to Step 9. foot is not engaged in the anti-tip bracket. IMPORTANT: If there is a snapping or popping sound when lifting the range, the range may not be fully engaged in the bracket.
-
Page 26: Gas Conversion
Dual Fuel Range GAS CONVERSION WARNING Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column. Examples of a qualified person include: licensed heating personnel, authorized gas company personnel, and... - Page 27 Dual Fuel Range Pressure Rate Burner Position Diam. (mm) Type [i.w.c.] [BTU/h] Rear R 4" LP (Propane) 10" Semi-Rapid Rear L and 4" Center LP (Propane) 10" Triple Front L 4" 18000 LP (Propane) 10" 18000 Rapid Front R 4" LP (Propane) 10"...
-
Page 28: Step 1 - Adjust The Gas Pressure Regulator
Dual Fuel Range STEP 1 - ADJUST THE GAS PRESSURE REGULATOR IMPORTANT: 1. Unscrew the regulator cap with the wrench. Regulator Cap 2. Remove the retainer pin that is currently positioned for use with Natural Gas. Retainer Pin 3. Turn the retainer pin upside down and replace it into the regulator cap. It is now positioned for use with LP gas. - Page 29 Dual Fuel Range STEP 2 - CHANGE BURNER ORIFICES IMPORTANT: the Burner Chart earlier in this section. NOTE: possibility that some may not be replaced. 1. Remove the burner grates, burner caps and burner heads. Triple Ring Burner Semi-Rapid Burner Rapid Burner...
-
Page 30: Step 3 - Adjust Burner Flames
Dual Fuel Range 4. Replace the burner bases, heads, caps and top grates. Make sure burner caps are properly seated on the burner head. Properly Seated Not Properly Seated STEP 3 - ADJUST BURNER FLAMES NOTES: will soon disappear. Silkscreen of knobs Adjustments must be made with two other burners in operation on a medium 1. -
Page 31: Step 4 - Testing Flame Stability
Dual Fuel Range STEP 4 - TESTING FLAME STABILITY Test 1 Test 2 - With the burner on “ ”, open and close the cabinet door under the Silkscreen of knobs STEP 5 - FLAME RE-CHECK IMPORTANT: Once the conversion has been completed and has passed testing, conversion is made. - Page 33 Model: JJZ(Y/T)-7MG10 Edition: A/0 Publication Date: October,13,2022...
Need help?
Do you have a question about the JJZY-7MG10 and is the answer not in the manual?
Questions and answers