Advertisement
Quick Links
1. Take stock of the enclosed VRT Components
● 1 Vibration Transducer
● 1 Speaker Power Connection with Molex
● 4 Mounting Screws
2. Then check to make sure you have the correct VRT Molex connectors. These are located in the area
under the sauna bench. See the photo below.
Vibration Resonance Therapy (VRT) Installation Guide
www.purelyrelaxation.com
www.infraredsauna.com • 800.798.1779
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Jacuzzi VRT
Summary of Contents for Jacuzzi VRT
- Page 1 ● 1 Vibration Transducer ● 1 Speaker Power Connection with Molex ● 4 Mounting Screws 2. Then check to make sure you have the correct VRT Molex connectors. These are located in the area under the sauna bench. See the photo below.
- Page 2 www.infraredsauna.com • 800.798.1779 3. Next, if required, you will need to attach the speaker power connection wire to the transducer(s). ● Twist left to unscrew ● Insert the red wire through the Positive ( + ) terminal to the point where its about to exit through the other side of the hole ●...
- Page 3 (not the ergonomic side) ● About 1/3 in from the left and right end of the bench (Dual) ● In the middle if you have and plan on only having one VRT unit ● Center it down the middle groove between bench slats 4.
- Page 4 • 800.798.1779 6. To turn on the VRT you will need to flip the switch located in the ceiling next to the speakers. This will allow you to switch between the sound coming out of the audio speakers and the vibrational speakers.
Need help?
Do you have a question about the VRT and is the answer not in the manual?
Questions and answers