Tips And Techniques; Care And Cleaning - Kenmore 204101 - Elite 56 oz. Stand Blender Use And Care Manual

For quickei; easier blending, cut f ood i nto 2 -in. long p ieces before adding toblender jar.
To chop, grate o rprepare i_ruJt smoothies, with e ither fresh orfrozen fruit, cut f ruit into
about 3/4-inch long p ieces.
To best circulate foods orfruit that are tobe blended with liquid, pour the liquid into thejor
first, then a dd the
solid foods or fruit.
Some tasks cannot be performed efficiently with a blender. These are: Beating egg whites,
Whipping cream, mashing potatoes, grinding meats, mixing dough, and extracting juices
from fruit and vegetables.
The following i_ems should never be placed in the blender jar, as they can cause damage:
Bones, targe pieces of solid frozen foods, or dense, tough foods such as turnips.
To crush ice ALWAYS have liquid in the jar. Start out with 2 cups of I_quid, and add about
2 cups of ice cubes. Hold one hand firmy on the id. Push the Joe Crush button.
If more ice is needed remove the measuring cup in the middle of the lid and add cubes
one at a time through the hole _nthe id. DO NOT CRUSH ICEWITHOUT LIQUID.
failure to follow these directions can result in damage to the blades, jar, blender motor,
and possibly result in personal injury.
If you should ever need replacemen_ parts for this bIender, contact Sears Par.fs and
Repair Service at 1-800-4-MY-HOME.
1. Before cleaning, unplug the blender,
2. Rinse parts (jar, blade assembly, gasket, collar, lid and measuring cup inner tid]
immediately after blending br easier cleanup.
3. AIt removabb parts con be washed by hand or in a dishwoshe_ The Iid, measuring
cup, collar, gasket and blade assembly shouid be placed in the top rack only.
Disassemble before placing in the d_shwasher. The jars a re bottom rack
dishwasher-safe. Do not place the jar or any other parts in boiling liquids.
€. The motor/base is designed to be resistant to liquids. If liquids spi_i into the motor/base
• Unplug the motor/base.
• Wipe with a damp cloth and dry thoroughl'/
5. Do not use abrasive scouring pads or cleaners on base as finish may become
scratched or damaged.
6. Any other servicing should be pretormed by an authorized service Representative.