Advertisement
Advertisement
Table of Contents
Related Manuals for BAUKER PFS260GH.2
Summary of Contents for BAUKER PFS260GH.2
- Page 1 PFS260GH.2 260W 1/3 SHEET SANDER ORIGINAL INSTRUCTION MANUAL...
-
Page 2: Safety Information
SAFETY INFORMATION WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions Important - Please read these instructions fully before starting assembly may result in electric shock, fire and/or serious injury. General Power Tool Safety Warnings Save all warnings and instructions for future reference. - Page 3 extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is Important - Please read these instructions fully before starting assembly unavoidable, use a residual current device (RCD) General Power Tool Safety Warnings protected supply.
- Page 4 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.
- Page 5 EN-5...
- Page 6 A E5 EN-6...
- Page 7 A E5 EN-7...
- Page 8 SYMBOLS To reduce the risk of injury, user must read instruction manual Wear eye protection Wear ear protection Wear dust mask Warning Double insulation Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice. EN-8...
-
Page 9: Component List
5. DUST OUTLET 6. SANDING PAPER CLAMP 7. ALUMINIUM BASE PLATE Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA Type PFS260GH.2 (PFS-designation of machinery, representative of Finishing Sander) Rated voltage: 230-240V~ 50Hz Rated power:... -
Page 10: Noise And Vibration Data
NOISE AND VIBRATION DATA A weighted sound pressure = 74,3 dB(A) = 3.0dB(A) A weighted sound power = 85,3dB(A) : 3.0dB(A) Wear ear protection. Vibration Information Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value: = 4,6m/s Uncertainty K = 1,5 m/s ²... - Page 11 OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. 1. FITTING THE SANDING PAPER SANDING PAPER WITH HOOK & LOOP SYSTEM FIT THE SANDING PAPER (SEE FIG.
- Page 12 The condition of the surface to be sanded will determine which grit will do the job. If the surface is rough: Start with coarse grit (sold separately) and sand until the surface is uniform. Then use medium to remove any scratches left by the coarse grit. Then use finer grit (sold separately) for finishing the surface.
-
Page 13: Maintenance
remove any scratches left by the coarse grit. Then use finer grit (sold separately) for finishing the surface. NOTE: Always continue sanding with each grit until the surface is uniform. WORKING HINTS FOR YOUR SANDER 1. If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. -
Page 14: Environmental Protection
ENVIRONMENTAL PROTECTION Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & IRELAND) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: BLUE –... -
Page 15: Declaration Of Conformity
Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK Declare that the product Description Finishing Sander Type PFS260GH.2 (PFS-designation of machinery, representative of Finishing Sander) Function Removing surface material using an abrasive medium Complies with the following Directives, 2006/42/EC, 2011/65/EU, 2014/30/EU...
Need help?
Do you have a question about the PFS260GH.2 and is the answer not in the manual?
Questions and answers