Table of Contents
Advertisement
Bluetooth™ wireless
lose the wires and go wireless
Quick start: Bluetooth wireless
Settings
Find it:
Menu
>
Bluetooth settings
>
Bluetooth settings
Bluetooth
Device name
(#########) 38.4 MHz Class 1.5
Discoverable
Make device discoverable
Scan for devices
Bluetooth devices
(found device name)
Pair with this device
Turn Bluetooth power on or off
Find it:
Press and hold Power
Note:
To extend battery life, turn Bluetooth power
off when not in use.
38
Bluetooth™ wireless
Wireless controls
>
Tap to turn on & scan.
Tap to re-scan.
Tap to connect.
Bluetooth
>
Connect new devices
Note:
This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, see "Reconnect devices" on page 39.
1
Make sure the device you are pairing with is in
discoverable mode.
Note:
Refer to the guide that came with the device
for details.
Settings
2
Press Menu
>
Bluetooth settings
>
Bluetooth
3
Tap
to turn on and scan. If Bluetooth is
Scan for devices
already on, tap
4
Tap a device to connect.
OK
5
If necessary, tap
0000
(like
) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note:
Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
Wireless controls
>
.
.
or enter the device passkey
Advertisement
Table of Contents
