Advertisement
Quick Links
Advertisement
Related Manuals for STL GRANDIRECT CONTROL
Summary of Contents for STL GRANDIRECT CONTROL
- Page 1 GRANDIRECT CONTROL SWITCH BOX C-GDCB INSTRUCTION MANUAL SpeedTech Lights, Inc © 2023...
- Page 2 This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
-
Page 3: Maintenance
Grommets, cable ties, looms, and other installation hardware should be used to anchor and protect all wiring. Fuses should be properly sized and located as close to the power take off points as possible to protect the wiring and device. To protect against short circuits, a fuse is included by STL for all products. -
Page 4: Switch Box
GRANDIRECT CONTROL SWITCH BOX GranDirect Control Switch Box Operation The GranDirect Control Switch Box combines the operation of the Grand and Direct Contol Switch Boxes into a single housing. Below is an outline of both operations. Grand Control Operations (Left Side) Power Button: •... - Page 5 GRANDIRECT CONTROL SWITCH BOX GranDirect Control Switch Box Operation The GranDirect Control Switch Box combines the operation of the Grand and Direct Contol Switch Boxes into a single housing. Below is an outline of both operations. Direct Control Operations (Right Side) Power Button: •...
- Page 6 • Refer to the wiring diagram of the STL product being connected to ensure proper connection. All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means, including but not limited to photocopying, recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without...
Need help?
Do you have a question about the GRANDIRECT CONTROL and is the answer not in the manual?
Questions and answers