Motorola D160 Manual page 35

d160d170.bk : optmenu.fm5 Page 31 Monday, December 15, 1997 4:08 PM
Unblocking Your Phone
If you receive the Blocked message, you will need to enter an
unblock code and key sequence before you can use the phone.
The 8 digit PIN unblocking code will have been provided with
A
your SIM card by your Cellular Service Provider.
Enter the following key sequence to unblock your phone:
* * 0 5 *Unblock Code O New Pin
Code O New Pin Code O
The new PIN code must contain four to eight digits.
!If this operation is performed incorrectly ten times in a
row, your SIM card will become permanently blocked.
Change SIM pin2 code
This option is used to change your PIN2 security code.
!If the PIN2 security code is entered incorrectly three
times in a row, the Blocked message will be displayed.
Unblocking Your Phone
If you receive the Blocked message, you will need to unblock
and change the code before you can use the phone.
The 8-digit unblocking code will have been provided with your
A
SIM card by your Cellular Service Provider.
Availibility of the SIM PIN2 Code is dependant on the SIM card
in use.
* * 0 5 2 * Unblock Code O New
Pin2 Code O New Pin2 Code O
!If the PIN2 unblocking operation is performed
incorrectly ten times in a row, your PIN2 code will
become permanently blocked.
New Security Code
This option is used to change the security code, which is set at
manufacture to 000000.
Extended Menus
Used to switch the extended menus on or off.
Language Selection
Used to change the language for display messages.
Change Greeting
Changes the message displayed when you switch on your phone.
May not be available if pre-programmed by your Service Provider.
Battery Saving Mode
This option will help to conserve battery power. Also known as
DTX (Discontinuous Transmission), this feature causes your
phone to operate at reduced power when you are in a call and
not talking.
Select Keypad Tones
Allows you to change or disable audible tones on a key press.
Using The Options Menu
31 English