Helmer PC900 Manual

PLEASE READ BEFORE USE
If you are planning on using a HELMER Model PF48 or PF96 inside this incubator
and the first digit of the serial number of the PF48 or PF96 is "4" or greater than
you may use the enclosed supplemental parts found in the shipping container to
add an additional drawer to the top of the flatbed agitator. Follow the instructions
located on the template in the rear pocket of this manual. If your agitator is not as
noted above keep the extra parts as spares.
For units sold in the United States only:
If you wish to place a platelet rotator (not a flatbed) into this incubator, which
requires the rotator to be pulled out on a drawer for access, order the following
supplemental part (if you have not done so already):
Model Part Number Description
PC900 400171 Drawer Assembly - PC900
PC1200 400204 Drawer Assembly - PC1200