Related Manuals for Greengage ALIS
Summary of Contents for Greengage ALIS
- Page 1 PATENTED INDUCTION POWERED TECHNOLOGY BY Greengage www.greengage.global/patents DTD Controller Instructions DTD VERSION 12/09/22...
-
Page 2: Led Indicators
(Flashing = cycle ramping Solid = cycle complete) Blue Ramp Down LED 2 User Switch Control DTD Controller Channel A and Channel B: automatic off manual modes www.greengage.global AUTO AUTO Adjust brightness manual mode only 3 Programming Instructions • Event Numbering... - Page 3 To program the DTD please follow these sequences from the home screen: • t Clock Step 3 Step 2 Step 4 Step 5 Step 1 Hour Minutes • Set Lights Step 1 Step 2 Step 3 Step 4 Event Hour Minutes Step 7 Step 8...
- Page 4 Event 4 - 10pm the lights go off, with a fade Event 9 22:00 down time of 15 minutes. Event 10 22:00 If you require further assistance, please contact support@greengage.global 02/05/24 DTD CONTROLLER • VERSION PAGE 4 OF 9 -05-0202...
-
Page 5: Dip Switch Settings
Normal ramp speed from zero to one hundred percent. 1% is 0.07V The Greengage DTD should be set with switches 1-3 down and switch 4 on. Channel A and B have 10 events to set up, 5 ramps up and 5 ramps down. -
Page 6: Appendix 1: Dtd Dip Switch Settings
Appendix 1: DTD Dip Switch Settings MODE 1 With all switches in the down position the unit is set to single channel basic mode. This provides one relay output and one 0-10v output. The ramp up/down settings remain the same as set regardless of which day the unit is on. -
Page 7: Appendix 2: Connection Diagram
Appendix 2: Connection Diagram 02/05/24 DTD CONTROLLER • VERSION PAGE 7 OF 9 -05-0202... -
Page 8: Appendix 3: Template Lighting Cheat Sheet
Appendix 3: Template lighting cheat sheet 02/05/24 DTD CONTROLLER • VERSION PAGE 8 OF 9 -05-0202... - Page 9 02/05/24 DTD CONTROLLER • VERSION PAGE 9 OF 9 -05-0202...
Need help?
Do you have a question about the ALIS and is the answer not in the manual?
Questions and answers