Subscribe to Our Youtube Channel
Related Manuals for Enable-IT 8930
Summary of Contents for Enable-IT 8930
- Page 1 Enable-IT 8930 1-Pair Extreme Reach Ethernet Installation Manual All Rights Reserved 1997 - 201 -IT - Proprietary and Confidential NABLE...
- Page 2 If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation. If you are unable to locate a copy, please contact Enable-IT, Inc and a copy will be provided to you.
-
Page 3: A Technical Support
CONTENTS BOUT UIDE -IT 8930 E NTRODUCING NABLE XTREME EACH THERNET ONCENTRATOR About the 8930 Extreme Reach Ethernet Concentrator Key Benefits Summary of Features Typical Applications -IT 8930 E NSTALLING THE NABLE XTREME EACH THERNET ONCENTRATOR Site Plan – Installation Design Considerations... -
Page 4: About This Guide
ABOUT THIS GUIDE This guide provides all the information needed to install and use the Enable-IT 8930 Extreme Reach Ethernet Concentrator. This guide is intended for use by technicians who are responsible for installing and setting up network equipment. Consequently, it is assumed that the installer has a basic working knowledge of LANs (Local Area Networks) and voice telecom wiring. - Page 5 1 pair Telco wiring. This chapter contains introductory information about The 8930 Extreme Reach Ethernet Concentrator and how it can be used in your network with the Enable-IT 830 Extreme Reach Ethernet CPE. It covers the following topics: ...
- Page 6 IP LAN (if needed) through a web interface. Any PC configured with the same IP subnet as the default Enable-IT 8930, running a web browser can be attached to the 8930 LAN interface via an Ethernet crossover cable is able to manage and change the default configuration.
- Page 7 ATM Support ATM Signaling UNI 3.1 & 4.0 PPP (RFC 2364) over ATM RFC 1483 RFC 1577 (IP over ATM) AAL0, AAL2, AAL5 ATM Service Class: UBR/VBR/CBR 32 VCs All Rights Reserved 1997 - 2014 Enable-IT, Inc. Page 7 of 17...
- Page 8 Broadband Access Provider needs. The 8930 Extreme Reach Ethernet Concentrator is a passive device so interruption of Internet service does not affect POTS services. Carriers and Access Providers can came and go, but the 8930 Extreme Reach Ethernet Concentrator technologies continue to provide lasting value such as the other utilities like Water, gas and electricity.
- Page 9 8930 Concentrator can operate over active phone lines or spare unused lines running to each respective 830 Extreme Reach Ethernet CPE location. Do you have a DHCP server on your LAN or do you need the 8930 to provide for your remote locations. Unpacking the 8930 Extreme Reach Ethernet Concentrator Carefully remove the 8930 Extreme Reach Ethernet Concentrator from the packing box including the provided cabling, rack mount hardware and manual.
- Page 10 Connect the provided RJ-21 to the rear of the 8930 and other end to your Telephone Block. Use a Telco standard telephone block with a RJ-21 50-pin (25-pair) connector or use the provided RJ-21 Cable and cut off one head and punch down following industry standard 25-pair color code.
- Page 11 Warning: There are many complex settings in the menu structure of the Enable-IT 8930 and should not be modified except for configuring your LAN IP Subnet scheme and DHCP Server (If you don’t currently have one on your LAN). Otherwise the 8930 is plug and play operation.
- Page 12 The Sync LED will be lit green on the 830 CPE to show proper connection and airing with the 8930 concentrator. If the Sync LED is not lit or lit Red, try swapping the order of the 1-pair telephone wiring at the telephone wallplate jack.
- Page 13 8930 port or swap the 830 CPE. If connectivity is established with the tested 8930 port and Enable-IT 830 CPE, then your troubleshooting focus is the in-room wiring or the Home run wiring from the room to the 8930 1 - Pair Ethernet Extension controller.
-
Page 14: Technical Support
Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources. -
Page 15: Product Warranty
Remedies for Breach of Warranty In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund of the purchase price for the Product. - Page 16 PROGRAMS, DATA, OR OTHER INFORMATION STORED ON OR TRANSMITTED USING THE PRODUCT. 2. LIMITATION OF LIABILITY IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE...
- Page 17 Sales and Customer Care: Toll Free US and Canada 888 309-0910 866 389-8605 Fax Other International +1 702 924-0402 +1 702 800-2711 Fax E Mail sales@enableit.com support@enableit.com RMA Support: http://support.enableit.com All Rights Reserved 1997 - 2014 Enable-IT, Inc. Page 17 of 17...
Need help?
Do you have a question about the 8930 and is the answer not in the manual?
Questions and answers