Related Manuals for Enable-IT 820P
Summary of Contents for Enable-IT 820P
- Page 1 Enable-IT 820P Extended Ethernet Quickstart Guide -IT All Rights Reserved 1997 - 2015 NABLE - Proprietary and Confidential...
- Page 2 Then connect your originating LAN device to the 820 P LAN IN port . Next , attach a LAN device to the Interlink Out port on the 820P unit . Then power on your remote LAN device locally . The 820P unit should now be powered up and passing LAN data.
- Page 3 820 LAN & PoE IN – Slow yellow LED flashing indicates LAN connectivity. Flickering yellow LED indicates LAN traffic. 820 Interlink Out 5v Power – Solid green LED indicates that the 820 is powered on and running All Rights Reserved 1997 - 2015 Enable-IT, Inc. Page 3 of 5...
- Page 4 1, 2, 3 & 6. For Data and PoE use all pins. PoE uses pins 4, 5, 7 & 8 Unpacking the Enable-IT 820 Pro Extended Ethernet Kit Carefully remove the Enable-IT 820 Pro Extended Ethernet Unit and all packing materials from the box. Verify that the items listed below are present. Make sure that the equipment supplied matches what you ordered.
-
Page 5: Technical Support
Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources.
Need help?
Do you have a question about the 820P and is the answer not in the manual?
Questions and answers