Advertisement
Quick Links
AZ-GD180-HL STAINLESS STEEL SOFT CLOSING FLAP LID SYSTEM
Installation instructions
Thank you for selecting our product. Before starting installation,
please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
Damper allows silent closing of lid.
Side plates for anti-pinch function.
FOR YOUR SAFETY AND CORRECT INSTALLATION
Meaning of symbols
Warning
Prohibited
Caution
Caution
If not followed, injury or damage may result.
The AZ-GD180-HL is designed to function when installed vertically as shown below. Horizontal, slanted or upside down
installation will result in improper function and may lead to injury.
To prevent the risk of the product falling and causing injury, ensure that the AZ-GD180-HL is securely fastened to a structure
with adequate strength.
Do not disassemble nor modify any parts other than those described in this document.
Recommended ambient temperature range is 0 to 40 degrees centigrade.
The closing speed of the lid may vary according to ambient temperature .If the product is stored below zero degrees, please
store in room temperature for several hours before use.
PARTS DESCRIPTION
Description
Flap lid body
Warning sticker
Cover cap
DIMENSION DRAWING
(148.5)
when flap is at 90
4×
(23.5)
for installation
screws
1.5
100
Required
Quantity
3.5 holes
218
182
TOOLS NEEDED FOR INSTALLATION
Screws (not provided)
Choose the suitable length according to the material to be
mounted.
Recommended screw : 3mm tapping screw
CUTOUT DIMENSIONS
t i b l e
b u s
o m
I n c
s
i b l e
u s t
m b
C o
Cutout : front view
Cutout : side view
+1
209
0
Mounting screw holes
s
4 pcs
18 20
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lamp AZ-GD180-HL
Summary of Contents for Lamp AZ-GD180-HL
- Page 1 The AZ-GD180-HL is designed to function when installed vertically as shown below. Horizontal, slanted or upside down installation will result in improper function and may lead to injury. To prevent the risk of the product falling and causing injury, ensure that the AZ-GD180-HL is securely fastened to a structure with adequate strength.
- Page 2 INSTALLATION PROCEDURE Make sure that the LAMP logo is at the top. Slowly open and close the lid completely a few times in order to ensure correct operation. Cover the access holes with the cover caps provided. and the mounting surface.
Need help?
Do you have a question about the AZ-GD180-HL and is the answer not in the manual?
Questions and answers