AZ-GD400-HL STAINLESS STEEL SOFT CLOSING FLAP LID SYSTEM
Installation instructions
Thank you for selecting our product. Before starting installation,
please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
Damper allows silent closing of lid.
●
Side plates for anti-pinch function.
●
FOR YOUR SAFE WORK AND CORRECT INSTALLATION
Meaning of symbols
Warning
Prohibited
Caution
Caution
If not followed injury or damage may result.
The product is designed to function when installed vertically as shown below. Horizontal, slanted or upside down installation
will result in improper function and may lead to injury.
To prevent the risk of the product falling and causing injury, ensure that the lid body is securely fastened to a structure
with adequate strength.
Do not disassemble nor modify any parts other than those described in this document.
Recommended ambient temperature range is 0 to 40 degrees centigrade.
The closing speed of the lid may vary according to ambient temperature .If the product is stored below zero degrees, please
store in room temperature for several hours before use.
PARTS DESCRIPTION
Description
Flap lid body
Warning sticker
Cover cap
DIMENSION DRAWING
(240.5)
(25.5)
4×
3.5 holes
10
1.5
100
for installation
screws
Required
TOOLS NEEDED FOR INSTALLATION
●Screws (not provided)
Quantity
1
1
4
450
400
Choose the suitable length according to the material to be
mounted.
Recommended screw : 3mm tapping screw ・ ・ ・ ・ ・ ・ 4 pcs
CUTOUT DIMENSIONS
Cutout : front view
4×R6 Max
Mounting screw holes
s
t i b l e
b u s
o m
I n c
s
i b l e
u s t
m b
C o
Cutout : side view
427
+1
0
18 20
1
Need help?
Do you have a question about the AZ-GD400-HL and is the answer not in the manual?
Questions and answers