Download Print this page

Advertisement

Quick Links

Please take a few minutes to familiarize yourself with the features of your new pedal. We hope
ABOUT OUR ELECTRO-OPTICAL CIRCUITRY:
Two electronic components contol the On/of and Wah functions of this pedal. A shutter alters light
between the two components controlling functions like Wah, volume and switching. Electro-Optical
design ensures smooth pedal control without unwanted noise typical with potentiometer (pot)
controlled pedals.
ABOUT THE CONNECTIONS:
9V (Right side of Pedal): To ensure noise free operation, ONLY Morley's 9VDC 300 milliamp
regulated adapter should be used
IN (Right side of Pedal): Input jack. Plug instrument into this jack using 1/4" guitar cable.
OUT (Left side of Pedal): Connect amplifier to this jack using a 1/4" guitar cable.
USING AN AC ADAPTER:
All Morley pedals use Morley's 9VDC 300 milliamp regulated adapter. Center pin polarity is
negative. Using a non-regulated adapter could cause a low frequency hum in your
amplifier. Using an adapter with the wrong polarity may damage the pedal.
USING A BATTERY:
All Morley pedals are designed to use one 9V battery when not using an adapter. We suggest you
use a good quality alkaline battery. To prolong battery life, unplug your cord completely from the
input jack when not using the pedal. When the pedal is not used for extended periods, remove the
battery from the pedal. Our Quick Clip battery door gives easy access to battery compartment.
ONE YEAR WARRANTY
All Morley® pedals are warranted for one year from date of
purchase. To obtain warranty service, contact the store where
purchased.
50TH ANNIVERSARY CHROME MINI POWER WAH
FEATURES (MODEL MTPWO-C):
· ELECTRO-OPTICAL: No pots to get scratchy or go bad!
· WAH SWITCH: Turns on/off Wah effect
· WAH LEVEL: Knob allows you to customize Wah Level
MTPWO-C SPECIFICATIONS:
Power: 9V Battery or 9VDC 300mA regulated (center pin
negative)
Indicator: Wah Engaged, Bypass LED off
Knob: Wah Level Control
Dimensions: 6.85" L x 4.5" W x 2.5" H
Current Draw: 6 mA @ 9VDC
Weight: 2.1 lb./ 1.0kg
www.morleyproducts.com
THANK YOU FOR CHOOSING A MORLEY PEDAL.
YOU NOW OWN THE BEST PEDAL MADE!
you enjoy using it as much as we enjoyed building it.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MTPWO-C and is the answer not in the manual?

Questions and answers

Summary of Contents for MORLEY MTPWO-C

  • Page 1 Using an adapter with the wrong polarity may damage the pedal. USING A BATTERY: All Morley pedals are designed to use one 9V battery when not using an adapter. We suggest you use a good quality alkaline battery. To prolong battery life, unplug your cord completely from the input jack when not using the pedal.
  • Page 2 BATTERY USE All Morley pedals are designed to use one 9V battery when not using an adapter. Battery access is on the bottom cover via our "Quick Clip" Battery door. We suggest you use a good quality alkaline battery. To prolong battery life, unplug your cord completely from the IN/OUT jack when not using the pedal.