Pioneer A-229 Operating Instructions Manual

STEREO AMPLIFIER
Operating
Instructions
The illustration shows model A-229.
Thank you for buying this PIONEER product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
In some countriés or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING: to prevent FIRE OR SHOCK HAZARD. DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
| [For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel. Please
write this serial number on your enclosed warranty card and keep it in
a secure area. This is for your security.
[For Canadian model]
CAUTION: to prevent ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
ATTENTION: pour prevenir Les CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A
FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch. U.S.,
Canadian, European, U.K., and Australian models are not provided
with this switch.
Mains voltage in Saudi Arabia are 127 V and 220 V only.
The line voltage selector switch is on the rear panel. Before your model
is shipped from the factory, this switch is set to the power requirements
of the destination. Check that it is set properly before plugging the power
cord into the AC wall socket. If the voltage is not properly set or if you
move to an area where the voltage requirements differ, adjust the
selector switch as follows.
1. Use a medium-size screwdriver. _
2. Insert the screwdriver into the groove on the voltage selector, and
adjust so that the tip of the arrow points to the voltage value of your
area.
VOLTAGE SELECTOR
t—
240V
110V 120-127V
Medium-size screwdriver
Q) PIONEER
The Art of Entertainment