Download Print this page

Haws 9201EW Installation, Operation & Maintenance Instructions Manual

Tempered water blending system

Advertisement

Quick Links

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424
E-mail:
Tempered Water Blending System
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
HAWS warrants that all of its products are guaranteed against defective material or poor workmanship for
a period of three years from the date of shipment. The foregoing notwithstanding, HAWS warrants certain
specific products or components thereof for an adjusted period. A list of these excepted products and
components
and
a
www.hawsco.com/warranty. HAWS' liability under this warranty shall be discharged by furnishing without
charge F.O.B. HAWS factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first-class workmanship, provided that a claim is made in
writing to Company within a reasonable period after receipt of the product. Where claims for defects are
made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. HAWS shall
not be liable for the cost of repairs, alterations or replacements, or the labor required to implement them, or
for any expense connected therewith made by the owner or owner's agents, except upon written authority
from HAWS. HAWS shall not be liable for any damages caused by defective materials or poor
workmanship, except for replacements, as provided above. Buyer agrees that HAWS has made no other
warranties either express or implied in addition to those above stated, except that of title with respect to
any of the products or equipment sold hereunder and that HAWS shall not be liable for general, special,
incidental, or consequential damages claimed to arise under the contract of sale.
Equipment manufactured by HAWS is warranted to function if installation and maintenance instructions
provided are adhered to. The units also must be used for the purpose for which they were intended. Any
HAWS emergency equipment is intended to supplement first-aid treatment. Due to widely varying
conditions, HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury
or the aggravation of existing or prior injuries.
EXCEPT AS EXPRESSLY STATED HEREIN, HAWS HEREBY DISCLAIMS ALL WARRANTIES,
WHETHER EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED WITHOUT THE
WRITTEN CONSENT OF HAWS. REMEDIES AND REPLACEMENTS STATED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL HAWS BE LIABLE FOR ANY SPECIAL, PUNITIVE,
CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON INCLUDING BUT NOT LIMITED
TO DAMAGES FOR LOSS OF USE OR PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY
DAMAGE, OR OTHER MONETARY LOSS.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT:
FOR CUSTOMER SERVICE:
07/23
haws@hawsco.com
Model 9201EW
LIMITED WARRANTY
description
of
their
respective
1-800-766-5612
1-888-640-4297
Model 9201EW
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
website:
www.hawsco.com
warranty
terms
No. 0002080240 (6)
may
be
found
here:
Page 1 of 7

Advertisement

loading
Need help?

Need help?

Do you have a question about the 9201EW and is the answer not in the manual?

Questions and answers

Summary of Contents for Haws 9201EW

  • Page 1 HAWS shall not be liable for general, special, incidental, or consequential damages claimed to arise under the contract of sale.
  • Page 2 INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS Valve operating principle: The Haws Corporation 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash station, a cold water by-pass valve opens in the event of hot water pressure loss.
  • Page 3 4. Close the cold water supply: The flow rate must comply with the maximum cold shut off flow allowed by ASSE 1071 for this valve size. 5. Open the cold water supply: The outlet temperature should return to the pre-set level. 07/23 Model 9201EW Page 3 of 7...
  • Page 4: Troubleshooting Procedure

    Significantly lower outlet Confirm the hot water inlet pressure; it must be within +/- temperature. 10% of the cold inlet pressure. Confirm the cold water bypass valve is free of debris. Clean if necessary. 07/23 Model 9201EW Page 4 of 7...
  • Page 5 Please make a copy of this sheet for future testing prior to writing on this one. ® Corporation – All Rights Reserved © 2023 Haws ® HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. 07/23 Model 9201EW Page 5 of 7...
  • Page 6: Parts Breakdown

    DATE: 10/02/23 SCALE: DRAWING TYPE: PARTS BREAKDOWN SIZE: A SHEET 1 OF 1 © 2023 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation. PAGE 6 OF 7...
  • Page 7 CHK'D.: REVISION 4/20/12 APPROVED: DATE: 10/02/23 SCALE: 1:1.5 DRAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 © 2023 Haws Corporation - All Rights Reserved. HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.