Download Print this page

Haws Hydration Station 2000SM Installation, Operation & Maintenance Instructions Manual

Advertisement

Quick Links

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424
E-mail:
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
A ground-fault circuit breaker shall be installed
in the branch circuit supplying fountain
equipment. NEC680-51(a).
®
HAWS
warrants that all of its products are guaranteed against defective material or poor
workmanship for a period of one year from date of shipment. HAWS liability under this
warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any
goods, or part thereof, which shall appear to the Company upon inspection to be of
defective material or not of first class workmanship, provided that claim is made in writing
to company within a reasonable period after receipt of the product. Where claims for
defects are made, the defective part or parts shall be delivered to the Company, prepaid,
for inspection. HAWS will not be liable for the cost of repairs, alterations or replacements,
or for any expense connected therewith made by the owner or his agents, except upon
written authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages
caused by defective materials or poor workmanship, except for replacements, as provided
above. Buyer agrees that Haws has made no other warranties either expressed or implied
in addition to those above stated, except that of title with respect to any of the products or
equipment sold hereunder and that HAWS shall not be liable for general, special, or
consequential damages claimed to arise under the contract of sale. The drinking fountain
manufactured by HAWS is warranted to function if installation and maintenance
instructions provided are adhered to. The units also must be used for the purpose for
which they were intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED
OR GIVEN BY HAWS.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL, PLEASE CALL:
FOR PARTS CALL:
(U.S.A. AND CANADA ONLY) MONDAY-THURSDAY: 6:00 A.M. – 4:00 P.M. PST
01/10
haws@hawsco.com
Model 2000SM
HydrationStation
LIMITED WARRANTY
1-800-766-5612
1-800-758-9378
FRIDAY: 6:00 A.M – 1:00 P.M. PST
Model 2000SM
INSTALLATION, OPERATION
MAINTENANCE INSTRUCTIONS
website:
www.hawsco.com
TM
CAUTION! Prior to making any electrical
connections, verify with a voltmeter that power
from the service panel is off.
&
No. 2080108 (2)
Page 1 of 9

Advertisement

loading
Need help?

Need help?

Do you have a question about the Hydration Station 2000SM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Haws Hydration Station 2000SM

  • Page 1 HAWS liability under this warranty shall be discharged by furnishing without charge F.O.B. HAWS Factory any...
  • Page 2: Installation Procedure

    RECOMMENDED TOOLS: T-20 Torx driver, level, flathead screwdriver, Phillips #3 screwdriver. RECOMMENDED PARTS (NOT SUPPLIED): 8-12 #6 sheet metal screws, ½” screwdriver stop, 3/8” tubing, 6 1/8” x 3” zinc-plated steel toggle bolts, 6 zinc-plated steel 1/8” female washers. LOCATION OF UNIT: When installing this unit, local, state or federal codes should be adhered to.
  • Page 3 INSTALLATION PROCEDURE STEP 3: Unit is supplied with an external power cord. If desired, the power cord may be removed and the unit may be wired through the back; see Installation Drawing for rear electrical access location. Install supply line in one of the locations shown in Installation Drawing (if bottom inlet port is used, remove plug from port and install supplied grommet –...
  • Page 4: Maintenance

    INSTALLATION PROCEDURE STEP 10: Activate unit by placing a bottle or cup in front of the sensor. If sensor does not detect the object at the appropriate range, see Sensor Troubleshooting Guide. The pressure regulator may need to be adjusted to better complement the input pressure at the installation site.
  • Page 5: Repair Checklist

    30 seconds and will not reactivate until the obstruction is removed. Contact Haws Technical Support. 4. Unit does not activate. Check sensor window for obstruction; if it is obstructed, it may have automatically shut off after 30 seconds and will not reactivate until the obstruction is removed.
  • Page 6 For more information about Haws products, see our website: www.hawsco.com ® © 2010 Haws Corporation – All Rights Reserved ® HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. 01/10 Model 2000SM Page 6 of 9...