Thunder Laser NOVA Series User Manual

Hide thumbs Also See for NOVA Series:

Unified user's manual (77 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

USERS MANUAL

NOVA SERIES

THUNDER LASER

SYSTEMS

NOVA Series

Unified User's Manual

For NOVA 24, 35, 51, and 63

Thunder Laser

www.thunderlaser.com

tech@thunderlaser.com

March 2024

DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD

Dongguan City, Guangdong Province, China

www.thunderlaser.com

DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD

tech@thunderlaser.com

Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,

Dongguan City, Guangdong Province, China

Tel:(86) 18103043363

Table of Contents

Need help?

Do you have a question about the NOVA Series and is the answer not in the manual?

Questions and answers

David Crowell

August 13, 2025

What should the pulse dot look like coming right from the laser tube. I'm getting a halo dot right from the end of the laser

Summary of Contents for Thunder Laser NOVA Series

Page 1 Unified User’s Manual For NOVA 24, 35, 51, and 63 Thunder Laser www.thunderlaser.com tech@thunderlaser.com March 2024 DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD Dongguan City, Guangdong Province, China www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 2 NOVA SERIES Introduction This manual has been designated as the thunder laser systems, laser cutting machine installation and user guide; The manual is divided into five chapters, including general information instructions, safety instructions, the key components of every laser cutting systems and the installation steps, operation instructions and maintenance instructions from THUNDERLASER Company.
Page 3: Table Of Contents
Max Power buttons ................................44 4.4.5 Set the Layer Parameters ...............................44 4.4.6 Menu button ..................................45 4.4.7 File button ..................................45 ...................................48 PTIONAL ENSES www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 4 ..............................69 AINTAIN THE AILS ................................70 HECK THE ........................70 HANGE OOLING ATER FOR THE ATER HILLER ................................71 AINTENANCE www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 5: Chapter 1. General
Fire Hazard: High potential for fire. NEVER RUN UNATTENDED! Tips: Helpful notes or info that simplify the use or understanding. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 6: Designated
NOVA SERIES Designated The THUNDER LASER NOVA SERIES is used for engraving and cutting of signs, stamps and suchlike. A wide variety of materials such as rubber, acrylic, coated metal, tin, special steel, anodized aluminum, cork, cardboard, glass, leather, marble, several plastics and wood can be processed on the laser.
Page 7: Technical Data / Device Specification
(960 x ∞mm x 20 mm) (1360 x ∞mm x 20 mm) (1660 x ∞mm x 15 mm) www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 8 40% to max. 70%, not condensing Laser Safety Laser class CDRH Laser Safety Laser Class 2 CE compliant FDA approved www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 9: Ec Declaration Of Conformity
USERS MANUAL NOVA SERIES 1.5 EC Declaration of Conformity www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 10: Rohs Certificate
USERS MANUAL NOVA SERIES 1.6 RoHS Certificate www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 11: Manufacturer's Label
It is recommended to record all of the data so that you always have this handy. You will need to supply your Serial Number to our Support Team on occasion. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 12: Chapter 2. Safety
Any attempt to perform unauthorized modifications and changes to the machine can VOID THE WARRANTY. This does not apply to preventative & general maintenance, adjustment and alignment, etc… that follow Thunder Laser’s best practices. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com...
Page 13: Laser Safety Information
Laser Safety Information 1. To assess the potential dangers laser systems pose, they are classified into 2 safety classes, Thunder Laser NOVA series is a device of class 2. This is guaranteed by the protective housing and the safety installations.
Page 14: Warning And Information Labels
The warning and information labels in various locations if the machine should always be read carefully and understood. If labels are lost or damaged, they must be replaced immediately. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 15 USERS MANUAL NOVA SERIES www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 16: Chapter 3. Process Of Installing
Chapter 3. Process of Installing Unpacking You receive your THUNDER LASER NOVA SERIES packed in a wooden box which contains the laser machine and additional accessories. The following steps give you an overview of the unpacking and assembly of the laser.
Page 17: Location
Setting your Thunder Laser up in s suitable temperature controlled, dust free, moisture free, level, stable surface (a level concrete floor) with the recommended extraction is critical to the ongoing performance of the machine.
Page 18: Before Installation
The transparent bag has a set of machine door keys, USB flash drive, and an engraving test sample. The USB flash drive stores software, manuals, libraries, etc… that you will need. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 19 4. When you have the machine in its final position, please be sure to re-fix the feet in all four corners. Please see below: The main power cable is in the tool box that came with the machine. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 20: Exhaust System - Requirements
Air assist is also critical when cutting to reduce flame-ups and clear the debris field. Always use the system’s Air Assist feature when vector cutting. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 21: Water Cooling System - Requirements
The supplied chiller only cools so it is of utmost importance to keep your laser from freezing! Do not run the machine without an adequate water cooling system. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 22: Computer - Requirements
These requirements are for RDWorks. LightBurn software renders jobs thousands of times faster than RDWorks. Check LightBurnSoftware.com for more information. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 23: Connections
Under no circumstances should you switch on the device if the voltages do not correspond. The mains cable is placed the front of the honey comb table. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 24: Connecting The Computer
Connecting the Computer and the machine by using the Ethernet cable. Like below: The USB and Ethernet cable are placed inside the toolbox. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 25: Connecting The Air System
The input voltage must correspond (AC 230V 50/60 Hz or AC 115V 50/60 Hz) – see information label beside the connection socket. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 26: Connecting The Exhaust System
Please refer to the following pictures about how to install the exhaust pipe: www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 27 The input voltage must correspond (AC 230V 50/60 Hz or AC 115V 50/60 Hz) – see information label beside the connection socket. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 28: Connecting The Cooling System
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 29 2. If the laser tube is filled with water and there are still some bubbles in the laser tube, please press the water inlet tube at the end of the laser tube to squeeze out the bubbles. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 30: Chapter 4. Operation
USERS MANUAL NOVA SERIES Chapter 4. Operation Machine View www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 31 Laser beam and red dot pointer are all come out from the laser head. 3. Auto-focus sensor Used for the automatic focusing of the work table. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 32 It’s used for lighting the working table once turn the Main switch on. 16. PC connection port(USB) This USB is for connecting computer. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 33 To connect the chiller power. 28. Blow air port This port is for connecting hoses of the air compressor. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 34 Please open this door for checking these parts, but must pay attention to that electric current. 32. Manufacture’s Label It’s Show you the laser information like serial number or manufacturing date etc. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 35: On/Off Switch
Please note that do not to press “ESC” button during the referencing process. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 36: How To Setup The Oem Software
How to install the coreldraw plugin for RDworksV8, click below link for instruction How to import PDF files into RDWorks (thunderlaser.com) www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 37 Please disable all Virus and Spyware Protection Features. After the RDworksV8 has been installed go back into your Anti-Virus software and re-enable the setting that was disabled. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 38: Make Connection Between Pc And Machine
The machine is already assigned an IP address when delivered: 192.168.1.100 Now set up your PC so that it is in the same network and can communicate with the machine. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 39 Now open your RDWorks from right bottom corner of the software, set up the Device by Setting>>Device --- Add a “Device---(IP:192.168.1.100)”. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 40 USERS MANUAL NOVA SERIES Now RDWorks communicates with your laser machine via LAN. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 41: How To Use The Display
Reset button: Reset the machine.  Pulse button: Pulse a laser beam.  www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 42 Esc button: To stop work, or return to the last menu.  Enter button: confirm your selection.  www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 43: The Main Interface
But, when work is running or paused, some buttons don’t respond when they are clicked. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 44: Speed Button
After selecting a file to preview on the main interface, user can click “Enter” button to modify the parameter for the file from the machine. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 45: Menu Button
File button 1). Memory File On the main interface, if “File” button is pressed, it will show as below: www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 46 Copy to Udisk: To copy the selected file to Udisk;  If the “Other” entry is pressed, the system will show as below: www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 47 For USB flash drive,you can use the one came with the machine to copy the file to your machine The file should be .rd file and it’s created by the “SaveToUFile” key on the RDworks. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 48: Optional Lenses
The 4-inch lens is suitable for general engraving and cutting materials with a thickness of 10mm and above. 4.5.2 How to replace different lens www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 49: How To Use Different Nozzle
So you get a clean, almost unaffected by smoke traces engraving. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 50: How To Focus
Press the auto focus function on the panel: Z/U >> Auto focus >> Enter. The platform will automatically rise, then lower to the appropriate height after triggering the sensor, indicating that the automatic focus is complete. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 51: How To Use The Tl-Timer
7. OUT7: Control the power for rotary device; 8. OUT8: Spare interface; www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 52 On the OUT8 interface, click again the “Set” button, the display will be off and exit the delay time setup. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 53: How To Use Air-Assist Control
You can also set default for “Air-Assist Control” option, so in cut mode, it will select High volume www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 54 It will be the best if using big air compressor instead of air pump for air-assist. Also you can refer to the video instruction below：https://youtu.be/GmiphyCBP3w www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 55: How The Heat Alarm System Works
When heat alarm system is activated, the warning sound will beep all the time until user restart the machine. Fire Hazard: High potential for fire. NEVER RUN UNATTENDED. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 56: The First Time Running The Laser
5. Open the software RDworksV8.First to set up the values on the “Scanning(Reverse compensation)” check box. Open Config(s)>>system setting>>Optimize>>Scanning(Reverse compensation),and there are some default values on the “Scanning(Reverse compensation)” check box. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 57 Control arrow button to move the laser head; Click “Origin” button to select the start point; www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 58 This is software specific, so if you are using LightBurn, you will need to do this in LightBurn. It is called “Scanning Offset Adjustment.” www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 59: Workstation Area Indication
USERS MANUAL NOVA SERIES 4.11 Workstation Area Indication www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China Tel:(86) 18103043363...
Page 60: How To Use The Chuck Rotary Axis Attachment
Connected it to this interface and fixed, and then you have finished the device connection. Like below: www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 61 Also you can refer to the video of how the rotary axis works in our website： Rotary axis attachment has a wrong cylindrical engraving/cutting size www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 62: For Laser Engraving
Engraving rubber produces a considerable amount of dust and terrible gas. Therefore a well-dimensioned exhaust system and its regular maintenance are very important. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 63: Chapter 5. Maintenance
5. You can clean the viewing window with a cotton cloth. Do not use paper towels as they could scratch the acrylic. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 64: Cleaning The Optical Parts
5. Remove the coarse dust as good as possible by blowing air onto the lens surface. 6. Check the surface and if necessary clean the lens with the lens cleaning liquid and swabs. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 65 4. Clean convex side of lens with swabs How to take out the lens, and please just as following the picture: www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 66: Cleaning The Mirrors
The 1 mirror is installed in the rear box of the laser tube, open it then view the right side. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 67 How to take out the mirror#1 #2 and#3, and please just as following the picture indicated: 1. The mirror#1 www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 68: Cleaning Laser Combiner
Examine the laser combiner. If it is still soiled, repeat the cleaning process until the lens is clean. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 69: Maintain The X/Y/Z Rails
Maintain the X/Y/Z Rails It is suggested to add lubricant oil (or Rust Preventative Grease) to the rails/screws at least every two weeks. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...
Page 70: Check The Beam Path
The quality and temperature of the cooling water affects the life time of the laser tube. You need to use pure distilled water and control the temperature below 35℃（95℉）. www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town,...
Page 71: Maintenance Plan
④ Clean Acrylic/Tempered glass covers in lid ⑤ The beam combiner must be checking every weekly, and cleaning if required. THE END www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD tech@thunderlaser.com Room1101, Building 3, No.68, Xingzhou Road, Shatian Town, Dongguan City, Guangdong Province, China...

This manual is also suitable for:

Nova 24 Nova 35 Nova 51 Nova 63

Thunder Laser NOVA Series User Manual

Chapter 1. General

Chapter 2. Safety

Chapter 3. Process of Installing

Chapter 4. Operation

Chapter 5. Maintenance

Quick Links

Need help?

Questions and answers

Related Manuals for Thunder Laser NOVA Series

Summary of Contents for Thunder Laser NOVA Series

This manual is also suitable for:

Table of Contents