Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Planika OIA
Summary of Contents for Planika OIA
- Page 1 INSTALLATION and USER’S MANUAL KL 21 G30/G31 (Propane-Butane/Propane) 401mm Produced by: Planika Sp. z o.o. Bydgoskich Przemysłowców 10 85-862 Bydgoszcz, Poland Telephone: + 48 52 364 11 60 Copyright Planika Sp. z o.o. www.planikafires.com IG0390#00 27.06.2024...
-
Page 2: Table Of Contents
T IS OBLIGATORY TO READ AND KEEP THIS INSTRUCTION TABLE OF CONTENTS INTRODUCTION ................................ 3 SAFETY INSTRUCTIONS ............................. 4 Safety instruction regarding the use of the gas cylinders................5 INSTALLATION ................................6 3.1. Box contents ..............................6 3.2. Unboxing and installation ..........................7 3.3. -
Page 3: Introduction
Register of Community Design. CE Declaration of conformity We hereby declare that both the design and construction of a gas heating device manufactured by Planika Sp. z o.o. (with registered office at Bydgoskich Przemysłowców 10 85-862 Bydgoszcz, Poland) Regulation (EU) 2016/462 of the European Parliament and of the Council of 9 March 2016 (GAR) on appliances burning gaseous fuels. -
Page 4: Safety Instructions
A CO2 or a powder fire extinguisher needs to be placed near the device. • During the first ignition the OIA fireplace needs to be burnt on maximum level for a few hours in order for the elements to acquire correct temperature and for the remains of paint, lacquer and lubricant to evaporate. -
Page 5: Safety Instruction Regarding The Use Of The Gas Cylinders
• If the OIA is not in use for a longer period of time (e.g. winter time), we advise you to store it inside. • All parts of the OIA fireplace are made of stain resistant material. -
Page 6: Installation
Filling the gas cylinders is to be commissioned to certified gas filling stations. • Replacement of empty cylinders for full ones is to be conducted only in authorised locations. INSTALLATION 3.1. Box contents • 1x complete OIA fireplace • 4x Tempered glass screens • 1x bag of decorative stones •... -
Page 7: Unboxing And Installation
Assemble the wheels in accordance with point 3.3. • Place OIA on a flat, paved surface outside of the building, preferably on the place of final installation. Leave sufficient space on the side of the appliance where control panel is located (minimum 1 m). -
Page 8: Installation Of The Glass Screen
3.4. Installation of the glass screen • Carefully remove cardboard and foam foil from the glass screens. • Remove all contaminations from the glass shields which could burn out on the glass during operation of the Oia (in particular fingerprints). -
Page 9: Installation Of The Gas Linkage And Gas Cylinder Replacement
The OIA is delivered together with an elastic gas linkage which, on one end is connected to the valve of the device and one the other end to the 37mbar regulator (in the twist-on version) ready to be connected to the gas cylinder. One needs to control the expiry date both of the regulator as well as the gas linkage and if necessary (for instance: broken, cut, scratched linkage) replace the components for new ones according to national standards and norms. - Page 10 Gas cylinder connection Twist-on connection Quick-release 1. Check if the bottle valve is TURNED OFF turning Remove the protection tip. Do not use any tools, it clockwise leave the tip hanging freely. 2. Remove the protection tip and store it for later use.
- Page 11 Disconnection of the gas cylinder Twist-on connection Quick-release Turn off the OIA – put it into the OFF position. The main burner need to be turned off. 2. Turn the bottle valve into the OFF position 4. Turn the switch into the OFF position.
-
Page 12: Regulator Replacement
5 years. Allowed pressures: 30 mbar, 37 mbar (recommended), 50 mbar. Use only the regulators that comply with the EN16129 European Norm. 2. Turn off The OIA -– the „OFF” position. The main burner need to be turned off. 3. Disconnect the regulator from the gas bottle (description above). -
Page 13: User's Manual
USER’S MANUAL The OIA fireplace has a control valve with a built-in ignition for the main burner (without pilot flame). The flame height of the main burner may be appropriately regulated with by turning the knob. Next to the knob is placed electric ignition button (powered by AAA battery). -
Page 14: Regulation Of The Flame Size
• While keeping the knob still pressed start the flame by pressing the ignition button (3). Fig 11 – Pressing the on button • A spark will appear which ignites the main burner on the minimum flame height. If the flame did not ignite repeat this process 2-3 times. -
Page 15: Replacing The Battery
If the problem happens again please contact the dealer. 5.2 Checking the flame appearance. • Burn the OIA on max flame height and check the appearance of the flame. • The flame should be evenly placed on the whole surface of the main burner. -
Page 16: Maintenance And Upkeep
7. WARRANTY Planika Sp. z o.o. grants the Client guarantee of quality for the smooth operation of the goods specified on the sales document. The warranty is determined for a given period from the date of purchase (based on the warranty card together with the receipt of purchase). -
Page 17: Troubleshooting
TROUBLESHOOTING Warning! Montage, upkeep and service need to be conducted by a qualified professional with appropriate qualification, an appropriate company or the gas supplier. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION CLOSE THE VALVE ON THE GAS CYLINDER IMMEDIATELY. DO NOT USE SMELL OF GAS THE DEVICE UNTIL LEAKS HAVE BEEN REMOVED. - Page 18 SELLER Name: Address: Tel/fax: Date of sale: Seller’s seal and signature BUYER Name: Address: Tel/fax: Date of purchase: The gas fireplace should be installed by a qualified Installer in accordance with the applicable national building regulations and in accordance with the guidelines contained in the Installation and User's Manuals. I hereby declare that having read the User's Manual and the Guarantee Conditions.
Need help?
Do you have a question about the OIA and is the answer not in the manual?
Questions and answers